基于Hypermesh的整车正碰分析
2020-02-25胡珀余强宋若旸赵轩
胡珀 余强 宋若旸 赵轩
摘 要:文章构建车辆的有限元模型,进行正面100%刚性壁障碰撞的模拟仿真,来分析车辆结构的潜在缺陷和合理性,主要内容为:(1)介绍整车中各个铰链以及加速度传感器的建立,对整车各个结构部件进行了连接设置,对整车的接触设置进行了说明,对材料的设置、刚性墙的建立以及控制卡片的导入进行说明。(2)利用Hypermesh和 LS-DYNA对模型进行计算,利用HyperView查看输出结果。(3)根据仿真计算的数据,对模型的合理性进行评价分析,发现前围板入侵量和B柱右侧加速度的指标偏大,影响了汽车的安全性能。关键词:正面100%碰撞;有限元;Hypermesh;LS-DYNA中图分类号:U467 文献标识码:A 文章编号:1671-7988(2020)02-40-05
Abstract: Full-text finite element model, 100% self-confrontation, wall-fault-like imitation, future analysis, implicit latent rationality. Main contents: (1) The theoretical basis of the finite element method is introduced, and the establishment of each hinge and acceleration sensor in the whole vehicle is introduced. The structural components of the whole vehicle are connected and set, and the contact setting of the whole vehicle is explained. The establishment of a rigid wall and the introduction of control cards are described. (2) Calculate the model using Hypermesh and LS-DYNA, and use HyperView to view the output consequence. (3) According to the data calculated by the simulation, the rationality of the model is evaluated and found that the intrusion of the dash panel and the acceleration of the right side of the B-pillar are too large, which affects the safety performance of the car.Keywords: Positive 100% collision; Finite element; Hypermesh; LS-DYNACLC NO.: U467 Document Code: A Article ID: 1671-7988(2020)02-40-05
前言
針对当今严重的交通事故,各国的工程技术人员都在努力提高汽车的安全性能。中国采用的标准是C-NCAP,是将在市场上购买的新车型按照比我国现有强制性标准更严格和更全面的要求进行碰撞安全性能测试,评价结果按星级划分并公开发布,旨在给予消费者系统、客观的车辆信息,促进企业按照更高的安全标准开发和生产,从而有效减少道路交通事故的伤害及损失。本文旨在介绍一种主流整车有限元前处理的方法,通过后处理的输出结果对某车型结构的合理性进行评价。
1 乘用车正碰有限元模型的建立
1.1 有限元分析的理论介绍
有限元分析(Finite Element Analysis)假定将刚体分割成数目有限多的小单元,在计算的时候将相临近的有限单元在几何的节点处相互连接,即将自由度无限的刚体在传递力和扭矩时进行简化,然后将计算域打散成一个一个可以迅速计算的小块。……
