油品蒸发损耗量测定方法的对比研究
2020-02-14梁颖
梁颖

摘要:油品的蒸发损耗量给品质上带来损失,还给大气环境带来了威胁,更重要的是在某些靠近油品储放地的地区造成了火灾隐患。本文从油品蒸发损耗测量的物性法出发,对比比样法和蒸气压法测蒸发损耗量的特性,确定测定限制条件。
Abstract: The amount of evaporation loss of oil products brings quality loss and threats to the atmospheric environment. More importantly, it has caused fire hazards in some areas near the storage place of oil products. This article starts from the physical property method of oil evaporation loss measurement, compares the characteristics of the evaporation loss measurement with the comparison method and the vapor pressure method, and determines the measurement limit conditions.
关键词:比样法;蒸气压法;蒸发损耗
Key words: sample comparison method;vapor pressure method;evaporation loss
中图分类号:TE89 文献标识码:A 文章编号:1006-4311(2020)01-0284-02
1 实验原理
1.1 比样法
比样法是利用油品蒸发速度与其化学组成之间的关系,以及化学组成与蒸发损耗率之间的关系创立的一种测定方法。将刚入罐时的油品作为试样1,敞口放置1天后的油品作为试样2,让两者在同温度恒温水浴箱中人工蒸发。油品馏分越轻蒸发速度越快[1]。
1.2 蒸气压法
与比样法相似,在蒸发损耗前后取两个试样,进行人工蒸发得出两个试样的蒸发损耗率与蒸气压的关系。由两者在相同蒸气压下蒸发损耗率的差得到储存期间的自然蒸发损耗率。
2 实验步骤
2.1 比样法
2.1.1 分别对1#和2#油品进行取样:
①取四个锥形瓶并在瓶底放几块碎瓷片防暴沸,然后分别称量四个锥形瓶的重量,待用。
②先对1#油品按有关规定采集油样,将油样1分开放进两个锥形瓶中,分别记a1、a2。将试样2放入两个锥形瓶中记b1、b2。并称量放入油样的锥形瓶得油样1净重A1、A2,油样2净重B1、B2。
2.1.2 将a1、b1在20摄氏度下恒温蒸发,每隔6分钟称量一次,a2、b2在50摄氏度下恒温蒸发,每隔2分钟称量一次。当两个油样在前后两次称量的差相等时,表示它们的蒸发速度相等,这时停止人工蒸发[2]。……
