基于ANSYS对离心风机叶轮弯曲变形分析与研究
2019-06-27孙晓明
孙晓明



摘 要:文章以有限元理论为基础,采用SolidWorks软件建立了发生破坏的离心风机叶轮结构数学计算模型。应用有限元法利用ANSYS软件详细对比分析了在该工作转速下叶轮发生经常性破坏的原因,求出了在该工作转速下叶轮的应力、变形情况。在此基础上,提出了增加叶轮刚度和强度的措施:包括改变叶片的形式、在电机功率允许的条件下增加叶片厚度及更换叶片材料,有效提高了叶轮的安全系数,为实现风机临界机号的突破提供了设计理论依据。
关键词:离心风机叶轮;刚度;强度;有限元
中图分类号:TM36+1 文献标志码:A 文章编号:2095-2945(2019)09-0013-03
Abstract: Based on the finite element theory, the mathematical calculation model of centrifugal fan impeller structure is established using SolidWorks software. Using finite element method and ANSYS software, the causes of frequent failure of impeller at this working speed are compared and analyzed in detail, and the stress and deformation of impeller at this working speed are obtained. On this basis, the measures to increase the stiffness and strength of the impeller are put forward, including changing the form of the blade, increasing the thickness of the blade and replacing the blade material under the conditions permitted by the power of the motor, and effectively improving the safety factor of the impeller. It provides a theoretical basis for the design of the breakthrough of the critical machine number of the fan.
Keywords: centrifugal fan impeller; stiffness; strength; finite element method
引言
离心式风机是众多工业部门输送气体介质的核心机械和主要的能耗设备。
叶轮是离心风机核心零部件。它的尺寸及强度对通风机性能起着关键性作用。
本文以有限元理论为基础,对某化工现场离心风机叶轮建立数学模型,应用有限元法分析了叶轮发生破坏的原因。在此基础上,提出了增加叶轮刚、强度的措施,有效提高了叶轮的安全系数,为实现风机临界机号的突破提供设计依据。
1 有限元分析数学模型及受力分析
根据经典力学理论,可以列出物体的动力学方程为:
2 叶轮强度及变形计算
叶轮主要由叶片、前盘、后盘、轴盘组成。分析时假定叶片为一固定梁,叶片因旋转产生的离心力假定为在梁上的均布载荷。
离心风机在化工现场运转中,叶轮出现弯曲变形现象,如图1所示,影响了风机的正常运行。……
