APP下载

Zircon U-Pb geochronology,geochemistry and petrogenesis of syenogranite from Angeer Yinwula area in Inner Mongolia

2019-05-28LIUHanlunWANGKeyongLIJianCAIWenyanTANGWenhaoandWANGChanghong

Global Geology 2019年2期

LIU Hanlun,WANG Keyong,LI Jian,CAI Wenyan,TANG Wenhao and WANG Changhong

College of Earth Sciences,Jilin University,Changchun 130061,China

Abstract: The study presents the results of U-Pb dating of zircons and whole-rock geochemical analyses of syenogranite in Angeer Yinwula area,China,with the aim of determining its formation time,petrogenesis and regional setting.Zircon U-Pb data obtained by LA-ICP-MS indicate that the syenogranite formed in the Early Cretaceous(136.1±0.9 Ma).Geochemically,the rock is characterized by high SiO2(76.63%--77.58%)and Na2O+K2O(8.00%--8.32%),low MgO(0.02%--0.04%)and TFe2O3(0.51%--0.84%),and is enriched in LREEs and LILEs,depleted in HREEs and HFSEs.It belongs to high-K calc-alkaline,metaluminous-weakly peraluminous,exhibiting an affinity to I-type granite.All these characteristics implied that the syenogranite in this region derived from crust-mantle mixed source.Overall,the regional geology,geochronology and geochemical features suggest that the formation of the syenogranite was related to the subduction of the Paleo-Pacific Ocean.

Keywords: syenogranite;zircon U-Pb dating;geochemistry;tectonic setting;Angeer Yinwula area;Paleo-Pacific Ocean

0 Introduction

In recent years,many scholars have conducted in-depth studies on the Angeer Yinwula area in Inner Mongolia,which is located in the superposition of the Paleo-Asian Ocean metallogenic domain and the Paleo-Pacific metallogenic domain.It is generally believed that there are a large number of Hercynian and Indosinian-Yanshanian intrusive rocks distributed in this area,reflecting multi-stage magmatic activities in this area.A large number of high-precision isotopic dating have been carried out for different types of granites developed in the northeastern part of China,which are about 30×104 square kilometers.(Wuetal.,2007),the granite body formed in the Mesozoic(230--120 Ma),only a handful of rock mass formed in the Paleozoic era,the Mesozoic granite can be further divided into Late Triassic to Middle Jurassic(230--160 Ma)and the Early Cretaceous(140--120 Ma),and generally has a tendency to grow younger from east to west(Wuetal.,2007).

Based on the syenogranite in the Angerer Yinwula area of Inner Mongolia,this paper aims to reveal the age of rock emplacement,genesis and tectonic background through accurate U-Pb dating and geochemical analyses,providing references for further understanding of magmatic activity and tectonic evolution in the Angeer Yinwula area.

1 Regional geological background

In terms of geotectonic location,the study area is located in the eastern part of the Central Asian Orogenic Belt in the composite superposition region of Paleo-Asian ocean tectonic domain,Mongolia-Okhotsk tectonic domain and the Paleo-Pacific tectonic domain(Yang,2013).The Central Asian Orogenic Belt is the most prominent area for continental crust hyperplasia and reconstruction in the world,with the tectonic pattern of multi-block,multi-suture belt inlaying,and mountain-basin coupling.The crust experienced the process of Paleozoic block assembly hyperplasia and Cenozoic continental orogeny.In the evolutionary process,with multiple stages and multiple types of crust-mantle interaction and diversified metallogenic processes,a multi-type metallogenic system with extraordinary enrichment of copper,gold,silver and other metallic elements was formed(Xiao,2008).

1.Quaternary;2.Tertiary Baogeda Wula Group;3.Cretaceous Erlian Group;4.Jurassic Baiyingaolao Group;5.Jurassic Manitu Group;6.Permian Gegen Obo Group;7.Carboniferous Baoligaomiao Group;8.Devonian Angeer Yinwula Group;9.Devonian Niqiuhe Group;10.Silurian Woduhe Group;11.Ordovician Tongshan and Duobaoshan Groups;12.measured reverse fault;13.measured normal fault;14.measured skrike-slip fault;15.Pleistocene basalt;16.Yanshanian granite;17.Indosinian granite;18.Late Hercynian granite;19.Middle Hercynian granite;20.sampling position.F1: Erlianhot-Hegenshan deep fault;F2: Dongwuqi-Yihe Shabaer deep fault;F3: Baiyun Hubuer-Mandu Baolige deep fault;F4: Barun Shabaer-North Chaobuleng fault;F5: West Chaobuleng-Wulagai fault;F6: Bayanmaodu ductile shear zone;F7: Chagan Obo-Wuchagou fault.Fig.1 Geological sketch map and geotectonic position map of Angeer Yinwula area(after Wu et al.,2003;Xu et al.,2009;Li et al.,2018)

Fig.2 Granite distribution map in AngeerYinwula area

Lithologic units ranging in age from Ordovician to Tertiary are exposed in the study area(Fig.1),such as Tongshan-,Woduhe-,Niqiuhe-,Angeer Yinwula groups.Magmatic rocks are abundant,and the magmatic history can be subdivided into three periods: Hercynian,Indosinian,and Yanshanian.Magmatism was most intense during the Middle to Late Hercynian and Yanshanian periods,and much less intense during the Indosinian(Fig.2).Geological structures in the region are dominated by faults,which control the distribution of both plutonic rocks and mineralization(Zhangetal.,2015;Keetal.,2017).Major structures include the Erlianhot-Hegenshan deep fault(F1),the Dongwuqi-Yihe Shabaer deep fault(F2),the Baiyun Hubuer-Mandu Baolige deep fault(F3),the Barun Shabaer-North Chaobuleng fault(F4),the West Chaobuleng-Wulagai fault(F5),the Bayanmaodu shear zone(F6)and the Chagan Obo-Wuchagou fault(F7)(Zhangetal.,2015;Liuetal.,2011).

2 Sampling and analytical methods

2.1 Description of samples

Representative zircon grains were separated from samples of syenogranite from drill holes(ZK8,ZK9).They were white in color,with medium-grained granitic texture and massive structure.It consisted of quartz(48%),plagioclase(15%),orthoclase(35%),and biotite(2%),along with accessory zircon,titanite,and apatite(Fig.3).

2.2 Zircon U-Pb dating

Reflected and transmitted light photomicrographs and cathodoluminescence(CL)scanning electron microscope images were taken prior to LA-ICP-MS analysis at the State Key Laboratory of Geological Processes and Mineral Resources,China University of Geosciences,Wuhan.Zircons were extracted using conventional heavy liquid and magnetic separation techniques,and then by handpicking under a binocular microscope at the mineral separation laboratory of Langfang Regional Geological Survey,Hebei Province.Clear and euhedral zircon grains were mounted in epoxy resin and polished to expose the centers of the zircons.Each analysis incorporated a background acquisition of 20--30 s(gas blank)followed by data acquisition for 50 s(Houetal.,2009).Data processing was conducted using ICPMSDataCal 9.9 program(Liuetal.,2010).U-Pb concordia age diagrams were made using the Isoplot 3.0 program(Ludwig,2003).

Qz-quartz;Bio-biotite;Pl-plagioclase;Or-orthoclase.Fig.3 Microphotographs of syenogranite in Angeer Yinwula area

2.3 Geochemistry

After petrographic examination,5 fresh samples were crushed and powdered in an agate mill to ~200 mesh.Whole-rock geochemical analyses were performed at the ALS Minerals-ALS Chemex,Guangzhou,China.Major element compositions were analyzed using an ME-XRF06 X instrument.Trace element compositions were analyzed using ME-MS81 and ME-MS82 instruments,respectively.The analytical results based on Chinese standard GDW07104 indicated that the analytical precision was better than 5% for major elements and 10% for trace elements and REEs(Yangetal.,2015).

3 Results

3.1 LA-ICP-MS zircon geochronology

Zircon selected from syenogranite were 50--100 um and the CL images of 21 zircon grains separated from the syenogranite show that they are mostly euhedral,having aspect ratios of 3∶1,and exhibiting regular oscillatory zoning(Fig.4).Generally,zircons with Th/U ratios higher than 0.5 with a positive correlation between Th and U are regarded as magmatic in origin,whereas those with Th/U ratios <0.1 are considered to be a result of metamorphic recrystallization(Connelly,2000).The results from 21 analytical sites were highly variable in Th(269--995)×10-6and U(571--2 081)×10-6concentrations and Th/U ratio of the zircons studied here are 0.3--1.6(Table 1),supporting a magmatic origin(Belousovaetal.,2002;Jianetal.,2001).21 spots were analyzed on 21 zircons and yielded ages ranging from 133--139 Ma.The plot on concordia shows a weighted mean206Pb/238U age of 136.1±0.9 Ma(mean square weighted deviation,MSWD=0.70)(Fig.5a,b),which is interpreted as the emplacement age of the syenogranite.

3.2 Geochemistry characteristics

3.2.1 Major and trace elements

The major and trace elements compositions for samples analyzed are listed in Table 2.All samples have loss on ignition(LOI=0.23--0.47),indicating low degrees of post-magmatic geochemical alteration.

Fig.4 CL images of zircons from syenogranite in Angeer Yinwula area

Fig.5 Zircon U-Pb concordia(a)and weighted average ages(b)disgrams from syenogranite in Angeer Yinwula area

Fig.6 TAS diagram of syenogranite in Angeer Yinwula area(after Irvine &Baragar,1971)

Thus,the results of measured element contents can be used to characterize the nature of their protoliths.

The selected samples are characterized byw(SiO2)of 76.63%--77.58%,w(Al2O3)of 12.52%--12.75 %,w(total Fe2O3)of 0.51%--0.84 %,w(TiO2)of 0.05% --0.07%,w(MgO)of 0.02% --0.04%,and Na2O/K2O ratios of 0.59 --0.76.The content of Na2O+K2O is high,ranging from 8.00% to 8.32% with an average of 8.20%.On the total alkali versus silica(TAS)classification diagram(Irvine &Baragar,1971),the data points fall in the granite field(Fig.6).The A/CNK ratio ranges from 1.04 to 1.06 and A/NK ratio ranges from 1.14 to 1.21,suggesting metaluminous-weakly peraluminous(Fig.7a)and display typical Si-enriched,K-enriched and Ca-depleted signature.The SiO2-K2O classification diagram shows that the rocks belong to high-K calc-alkaline series(Fig.7b).

Table 2 Contents of major(%)and trace elements(10-6)of syenogranite in Angeer Yinwula area

Note: LOI=Loss on ignition;A/CNK=molar ratio of Al2O3/(CaO+Na2O+K2O);A/NK=molar ratio of Al2O3/(Na2O+K2O);Mg#= 100×[(MgO/40)/(MgO/40+0.8998TFe2O3/72)];δEu=Eu/Eu*=EuN/Sqrt(SmN× GdN);LaN/YbN=(La/0.237)/(Yb/0.17).

Fig.7 Geochemical discrimination diagrams of A/CNK versus A/NK(a)(after Maniar &Piccoli,1989)and SiO2 versus K2O(b)(after Peccerillo &Taylor,1976)for syenogranite

Fig.8 Chondrite-normalized REE patterns(a)and primitive mantle normalized trace element patterns(b)for syenogranite in Angeer Yinwula area(after Sun &McDonough,1989)

Trace elements and REE analytical results of syenogranite show that the rock has ∑REE varying from 35.09×10-6to 90.03×10-6with an average of 51.37×10-6,and obvious fractionation between light rare earth elements(LREE)and heavy rare earth elements(HREE)in chondrite-normalized REE plots(LREE/HREE ratio of 2.60--3.89(average of 3.33)and LaN/YbNof 1.07--1.68)with negative Eu anomalies(δEu=0.37--0.55)(Fig.8a).Primitive mantle-normalized trace elements patterns for the syenogranite show strong enrichment in large ion lithophile(LILEs,e.g.,Rb,Th,U and K)light rare earth elements(LREEs)and depletion in high field strength(HFSEs,e.g.,Nb,Ta,P,Ti,Zr and Hf)and heavy rare earth elements(HREEs)(Fig.8b).

4 Discussion

4.1 Petrogenesis and magma source

4.1.1 Petrogenesis

The genetic types of granite in nature are mainly I-type,S-type and A-type,among which I-type and S-type are relatively common,and the correct judgment of the type is very important,which requires comprehensive multiple indicators.First,the occurrence of amphibole,cordierite and alkaline ferromagite is considered to be the most important and effective sign for judging the above three types of granite(Wuetal.,2007),and second,a series of geochemical diagrams(Whalenetal.,1987;Eby,1990)has also been widely used,but highly fractionated granite may overlap the I-,A- and S-type fields(Wuetal.,2007b;Qiuetal.,2008;Chenetal.,2015).It is difficult to distinguish the genetic types of granitoids,so classification should also involve petrographic and geochemical characteristics.

Rock mass has the following characteristics in the composition of major elements:

(1)Major element data show high SiO2with limited variation ranging from 76.63% to 77.58%(average of 77.10%),and have a high differentiation index(DI=94.39%--95.53%),indicating that the source magma was highly fractionated(Chappell,1999;Wuetal.,2003;Xiaoetal.,2014).

(2)S-type granites are strongly peraluminous(A/CNK>1.1)and generally contain aluminous minerals such as primary muscovite,cordierite and garnet(Chappelletal.,1992),which have not been observed in the samples.The intrusions studied in this paper are metaluminous with high A/CNK values(1.04--1.06),indicating that these rocks are metaluminous-weakly peraluminous.A small amount of corundum molecules(0.49%--0.79%)appeared in the CIPW standard mineral,which was significantly different from that of >1% in the standard mineral of S-type granite CIPW described by Chappell(1992),indicting they are not S-type magma affinity.

(3)The content of Zr,Nb,Ce,Y elements is low,with Zr+Nb+Ce+Y=(127.4--147.9)× 10-6,which is also significantly lower than the lower limit of A-type granite proposed by Whalenetal.(1987).As the degree of magma differentiation increases,the ratio of Ga/Al and FeOT/MgO of magma will gradually increase.It is common to cause some highly fractionated I-type granites to fall into the range of A-type granites(Eby,1992),but the sample points in this study area are generally located in the fractionated I-type granites in the relevant identification diagram for distinguishing A-type granites from fractionated I-type granites(Fig.9).

All the samples in this study are characterized by fractioned REE patterns,enriched LILE and negative anomalies of HFSE.In terms of trace composition,the rock is rich in Cs,Rb,Th,U,Pb,and poor in Ba,Sr,P,Ti.High field strength elements Nb and Ta are low,Rb/Sr ratio ranges from 2.15 to 4.74,K/Rb ratio ranges from 187.19 to 258.62,and the content of siderophile element(V,Co)is low,indicating that the rock has a high degree of differentiation and evolution,and the total amount of rare earth elements is low(Qiuetal.,2008),with ∑REE=40.25×10-6--90.03×10-6,LREE/HREE=2.60--3.89,(La/Yb)N=1.07--1.68,with a significant Eu-negative abnormality(Eu=0.37--0.55).Overall,we can conclude that the syenogranite in this study area is I-type granites.

4.1.2 Magma source

As mentioned above,REE in syenogranite is characterized by LREE enrichment,HREE relative deficiency,negative Eu anomaly and low Sr content,suggesting that the granitic magma in this area may originate from the lower crust(Sr content is lower in the lower crust).The ratio of Th/U in the samples is 4.20--12.61,which is larger than the ratio of Th/U in the lower crust(6.00),and the ratio of Sm/Nd is 0.26--0.30,which is close to the ratio of Sm/Nd in the continental crust(0.17--0.25).It indicates that most of the components of the rocks originate from the crust.In the∑REE-Y/∑REE diagram,most of the samples fall in the crust-mantle mixed source granite area(Fig.10).So the syenogranite in this area has the characteristics of crust-mantle mixed source.

In conclusion,the syenogranite in the study area is I-type granite derived from crust-mantle mixed source and has undergone significant fractionation.

A: A-type granite;FG: differentiated I-type granite;OGT: undifferentiated I-type,S-type and M-type granites.Fig.9 Identification diagrams of genetic types of highly differentiated I-type granite(after Whalen et al.,1987)

Fig.10 Diagram of ∑REE vs Y/∑REE

4.2 Tectonic setting

The zircon U-Pb LA-ICP-MS analysis of the syenogranite intruded in the study area yields an age of 136.1±0.9 Ma,corresponding to Early Cretaceous.

There are three views on the tectonic background of the Mesozoic in this region,which are related to the the Paleo-Asian oceanic slabs subduction(Windleyetal.,2007;Lehmannetal.,2010),or post orogenic extension after the closure of Mongolia-Okhotsk Ocean(Fanetal.,2003),or the Paleo-Pacific Ocean subduction(Zhaoetal.,1998;Zhangetal.,2008).During the Mesozoic,Mongolia-Okhotsk Ocean shows scissors closure from west to east,the closing of the eastern part may continue until the Late Jurassic to Early Cretaceous.In the Early Cretaceous,the volcanic rocks in the region generally have the characteristics of A-type rhyolite.However,the Mongolia-Okhotsk Ocean can only affect the western part of Songliao region,which is far from the research area,so the influence is ignored.

Previous research indicated that the final closure of the Paleo-Asian Ocean occurred during the Late Permian-Middle Triassic(Hongetal.,1994;Xiaoetal.,2003;Li,2006;Lietal.,2007),which was sooner than Late Jurassic to Early Cretaceous.We can conclude that the Paleo-Asian Ocean can hardly influence the evolution of the study area in Late Jurassic and Early Cretaceous.

Since the Late Mesozoic,it is more obvious that NE China was significantly affected by subduction of the Paleo-Pacific plate(Maruyamaetal.,1997;Wuetal.,2011).Through detailed study of petrology,mineralogy and geochemistry,it is determined that the Mesozoic granite in NE China is mainly I-type,mainly of high differentiation I-type,and a few of them are A-type granites(Wuetal.,2000,2003).In recent years,Xuetal.(2008)provided credible evidence for the time when the Paleo-Pacific tectonic system began the subduction by studying the calc-alkaline volcanic rock assemblages in Early-Middle Jurassic(173--190 Ma)in the eastern part of Jilin-Heilongjiang area.Therefore,the existence of the calc-alkaline volcanic rock assemblages can be used as an effective marker to determine the occurrence of subduction.Later,a series of Early Cretaceous volcanic rocks in eastern Jilin-Heilongjiang area was studied,and it is found that the volcanic rocks in this period were mainly composed of a set of calc-alkaline volcanic rocks(Yuetal.,2011),representing the existence of subduction of the Paleo-Pacific plate during this period.

The syenogranite in this study area is enriched Rb,Th,U,K and LREE,depleted Nb,Ta and Ti,which suggest that the rock originate in active continental margin(Gill,1987).From Jurassic to Cretaceous,accretionary terranes and calc-alkaline I-type granitoids were widely developed along the eastern Asian continental margin,including NE China,Far East Russian and the Japan islands(Jahnetal.,2004;Wuetal.,2007).Moreover,in(Yb+Nb)-Rb and(Yb+Ta)-Rb discriminate diagrams(Fig.11),the samples all fall in volcanic arc granite(VAG)field.We conclude that the syenogranite is the product of Paleo-Pacific Ocean subduction.

Fig.11 Diagrams of Rb-(Y+Nb)(a)and Rb-(Ta+Yb)(b)for syenogranite

5 Conclusions

(1)The results of zircon U-Pb dating indicate that syenogranite located in the Angeer Yinwula area yields an Early Cretaceous age of 136.1±0.9 Ma.

(2)The primitive magma of the syenogranite originated from crust-mantle source,and it belongs to I-type granite.

(3)Combined with the regional geological background,it is inferred that syenogranite in Angeer Yinwula area formed due to subduction of the Paleo-Pacific Plate in the Early Cretaceous.


登录APP查看全文