关于梁的弯曲中若干公式的分类讨论①
2019-02-06李成沈纪苹姚林泉
李成 沈纪苹 姚林泉



摘 要:梁的弯曲在工程结构中有着广泛的应用,一些基本公式如弯矩与内力的合力偶矩间关系、弯曲正应力与弯矩间关系、轴向应变与曲率间关系、挠曲轴微分方程、弯曲应力或轴向应变与挠度间关系等,往往会受到若干量的正方向规定之影响。教学中发现,学生们对基本公式的正负号时常会弄混。不同研究文献中对这些公式也使用着不同的表达形式,通常是相差一个负号。然而,何种情况下使用何种表达形式,或者所使用的表达式对应于何种正方向规定,在有些文献中缺乏清晰的说明。本文针对这个问题开展具体的分类讨论和总结,以期为梁的弯曲中基本表达式的使用提供明确的参考。
关键词:梁的弯曲 正应力 弯矩 挠度 曲率
中图分类号:O33 文献标识码:A 文章编号:1674-098X(2019)09(b)-0231-04
Abstract: The bending of beams is widely applied in engineering structures. Some basic formulas are often influenced by the positive directions of various quantities, such as the relationship between bending moment and resultant moment of internal force, the relationship between bending normal stress and bending moment, the relationship between axial strain and curvature, the differential equation of deflection curve, the relationship between normal stress or axial strain and deflection. It is found in teaching that students often confuse the positive and negative signs of basic formulas. These formulas were expressed differently in previous literatures, usually with a positive or negative sign. However, there is a lack of clear explanation in some literatures about which kind of expressions should be used in certain situations, or what the positive directions are corresponding to the formulas used. This paper carries out a specific classification and discussion, in order to summarize the differences and commonalities, and provide a clear reference for the application of the basic formulas in the bending of beams.
Key Words: Bending of beams; Normal stress; Bending moment; Deflection; Curvature
梁的彎曲是材料力学课程中的重要教学内容,一般包括弯曲内力、弯曲应力和弯曲变形三大部分[1-4]。在一些国内外现行的材料力学教材中,有的规定弯曲应力中横向坐标(以y坐标表示)以向下为正,而弯曲变形中挠度(以w表示)以向上为正[1-2];有的规定横向坐标和弯曲挠度均向下为正[3],还有的规定横向坐标和弯曲挠度均向上为正[4],等。正方向规定的不同使得前后两部分的公式推导特别在正负符号方面衔接不自然且易产生混淆。另外,不同的教材中对弯矩的正方向规定也不尽相同,多数以使得梁段发生上凹变形的弯矩为正,少数则以梁段发生上凸变形的弯矩为正。……
