Deep structural research of the South China Sea: Progresses and directions
2019-01-13XuwenQinBinZhaoFuyuanLiBaojinZhangHoujinWangRuweiZhangJiaxiongHeXiChen
Xu-wen Qin , Bin Zhao , Fu-yuan Li , Bao-jin Zhang , Hou-jin Wang , Ru-wei Zhang ,Jia-xiong He, Xi Chen
a Guangzhou Marine Geological Survey, China Geological Survey, Ministry of Natural Resources, Guangzhou 510760, China
b Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou), Guangzhou 511458, China
c Key Laboratory of Ocean and Marginal Sea Geology, Chinese Academy of Sciences, Guangzhou 510640, China
ABSTRACT
The South China Sea (SCS) is the hotspot of geological scientific research and nature resource exploration and development due to the potential for enormous hydrocarbon resource development and a complex formation and evolution process. The SCS has experienced complex geological processes including continental lithospheric breakup, seafloor spreading and oceanic crust subduction, which leads debates for decades. However, there are still no clear answers regarding to the following aspects: the crustal and Moho structure, the structure of the continent-ocean transition zone, the formation and evolution process and geodynamic mechanism, and deep processes and their coupling relationships with the petroliferous basins in the SCS. Under the guidance of the “Deep-Earth” science and technology innovation strategy of the Ministry of Natural Resources, deep structural and comprehensive geological research are carried out in the SCS. Geophysical investigations such as long array-large volume deep reflection seismic, gravity,magnetism and ocean bottom seismometer are carried out. The authors proposed that joint gravitymagnetic-seismic inversion should be used to obtain deep crustal information in the SCS and construct high resolution deep structural sections in different regions of the SCS. This paper systematically interpreted the formation and evolution of the SCS and explored the coupling relationship between deep structure and evolution of Mesozoic-Cenozoic basins in the SCS. It is of great significance for promoting the geosystem scientific research and resource exploration of the SCS.
Keywords:
Deep structure evolution
Deep seismic exploration
Joint inversion of gravity, magnetic and seismic
data
Oil, gas and hydrate resource survey engineering
Oceanic geological survey engineering
South China Sea
China
1. Introduction
The South China Sea (SCS) is located at the junction of the Luzon island, Indo-China, South China Block and Borneo(Fig.1). It is the largest and deepest marginal sea along the Western Pacific continental margin, with an approximate area of 350×104km2. There are more than 30 Cenozoic sedimentary basins located in the SCS (Yang SX et al., 2015;Zhao B et al., 2018a, 2018b), which contain abundant oil and gas resources. The SCS is one of the 4 major marine oil and gas accumulation centers in the world. It is estimated that the petroleum geological resources of the whole SCS basin group are approximately 2.263×1010t, and the total estimated natural gas resources are about 1.584×1013m3(Zhang GC et al.,2010; Zhang Q et al., 2018). Approximately 8.0×1010t Natural Gas Hydrate (NGH) resource is estimated stored in the areas of the SCS. The SCS has become an important energy strategic region of China after the discovery and successful production test of NGH in the SCS (Zhang GX et al., 2014, 2015; Xu X, 2017; Zhang RW et al., 2018; Li JF et al., 2018).
The formation and evolution of the SCS basin are controlled by the influence from the Eurasian plate, Indo-Australian plate, Philippine Sea plate, and Pacific plate. The subject basin can be divided into 3 sub-basins: East Sub-basin(ESB), Southwest Sub-basin (SWSB) and Northwest Subbasin (NWSB) (Fig. 1). Three main continental margin types are observed around the SCS: The tensional (passive) margin to the north and south sides, the subductional (active) margin to the east side and the shear (conversion) margin to the west side (Fig. 1). The SCS underwent large-scale tectonic assemblage, tectonic compression and strike-slip extension from the East Asian continental margin during the Mesozoic,experienced the final closure of the Meso-Tethyan ocean. It also underwent the process of Cenozoic continental lithospheric extension and breakup, seafloor spreading,subduction and collision (Taylor B and Hayes DE, 1983;Briais A et al., 1993; Yao BC and Wan L, 2006). The formation and evolution of the SCS have always been the focus of researches conducted by geologists and geophysicists. At present, the following aspects are still not clearly identified: The crustal and Moho structure, structure of Continent-Ocean Transition (COT) zone, formation and evolution processes and geodynamic mechanisms, as well as deep processes and their coupling relationships with the petroliferous basins in the SCS. It is of great scientific and energy strategic significance to continue deep structural study in the SCS.

Fig. 1. Regional geological and geodynamic framework of the SCS, modified from Lebedev S and Nolet G (2003), Wang PC et al. (2017) and Zhao B et al., 2019a; The magnetic anomalies are modified from Taylor B and Hayes DE (1980, 1983), Briais A et al. (1993). ZI-Zhongsha Islands; XI-Xisha Islands; NWSB-Northwest sub-basin; ESB-East sub-basin; SWSB-Southwest sub-basin; ASRR-Ailaoshan-Red River shear zone; ZNF-Zhongnan fault.
2. Advances in formation and evolution of the SCS
A variety of hypothesis have been proposed for the formation and evolution of the SCS including the back-arc spreading model (Karig DE, 1971, 1973; Ben-Avraham Z and Uyeda S, 1973), seafloor spreading model (Taylor B and Hayes DE, 1980), India-Eurasian collision and extrusion model (Tapponnier P et al., 1982, 1990; Leloup PH et al.,2001), mantle plume model (Lebedev S and Nolet G, 2003;Zhao D, 2007), continental margin expansion model (Xu YG et al., 2002), dextral strike-slip pull-apart model (Zhou D et al., 2002; Li SZ et al., 2012; Wang PC et al., 2017), etc.Although the continental margin expansion model has introduced the concept of mantle flow and seafloor spreading,the essence of this model is still about continental crust extension and thinning. Further studies are required for the mechanism of formation and evolution in the tensile environments with a regional compressive stress field (Luan XW and Zhang L, 2009).
2.1. Back-arc spreading model
The back-arc spreading model proposes that the SCS basin is formed by the back-arc spreading of the Pacific Ocean or the back-arc spreading of the North Palawan. The expansion of the SCS is related to the westward subduction of the Philippine Sea plate. From the Late Cretaceous to the Early Tertiary, the Pacific plate subducted to the Eurasian plate and formed a series of marginal seas on the Western Pacific margin including the SCS (Karig DE, 1971, 1973).Ben-Avraham Z and Uyeda S (1973) discovered the existence of east-west-direction magnetic anomalies in the SCS basin which made them believe that the SCS was formed by backarc expansion model. The difference from what Karig DE(1971) advocated is that Ben-Avraham Z and Uyeda S believed the opening of the SCS was the result of the southward rotation of the Borneo massif, rather than the eastward moving of the Luzon Island Arc. This could explain the magnetic anomalies more reasonably: The magnetic anomalies are approximate east-west-direction instead of being paralleled to the Luzon.
2.2. Seafloor spreading model
This model originally proposed that the East-Westdirection magnetic anomalies in the central SCS basin were formed by seafloor spreading (Taylor B and Hayes DE, 1980,1983). Briais A et al. (1993) established the detailed seafloor spreading mode in the SCS: During 11-7 magnetic isochrons(32-27 Ma, Fig. 1), the seafloor spreading activities mainly occurred in the NWSB and the ESB; During the 7-6b magnetic isochrons (26-24 Ma), the spreading ridge made a southward jump, and the direction of the spreading axis changed from near east-west to north-east. At this time, the SWSB began to open. The ESB and the SWSB spread simultaneously during the 6b-5c magnetic isochrons (24-15.5 Ma) and finally stopped at circa 15.5 Ma (magnetic isochron 5c, Fig. 1). According to the magnetic anomalies, sedimentary characteristics and the fault characteristics of continental margins, Yao BC (1996) advocated that the Cenozoic basin of the SCS underwent Atlantic-type seafloor spreading, and was influenced and restricted by the Indian and Pacific plates.Subsequent studies also suggested that the continental margin of the SCS was a passive continental margin of the Atlantic type, which underwent seafloor spreading and formed a complete oceanic crust (Sun Z et al., 2006, 2009; Li CF et al.,2007). For many years, the evolution of the SCS basin has been regarded as a “non-volcanic passive continental marginal basin” (Yan P et al., 2001), and the deep seismic profile of the SCS has been interpreted using the Atlantic model.
2.3. India-Eurasian collision and extrusion model
From the Late Oligocene to the Early Miocene, the subduction of the Indian plate beneath the Eurasian plate resulted in a large-scale propagating extrusion of the Eurasian continent along several faults, and a large-scale strike-slip movement along the Ailao Shan-Red River (ASRR) shear zone, which led to the southward movement of the Borneo Block. The SCS was a pull-apart basin formed at its end(Tapponnier P et al., 1982, 1990). Subsequent studies showed that the displacement of the extruded block along major faults such as the ASRR shear zone is 1000-1500 km, which is consistent with the expansion of the SCS (Peltzer G and Tapponnier P, 1988). The study of the ASRR shear zone and the strike-slip fault zone, located to the east of the Tibet Plateau, also provides a lot of evidences to support this model(Fig. 2, Leloup PH et al., 2001, 2007).
2.4. Mantle plume model
Based on the results of seismic tomography, mantle geochemistry and multidirectional extensional studies of sedimentary basins in the northern SCS, Flower M (1998)concluded that mantle plumes and lateral mantle flow exist beneath the SCS, which may cause seafloor spreading. The Hainan plume was termed by Lebedev S et al. (2000), and some studies have suggested that Hainan Island may be a hotspot-type volcano (Lebedev S and Nolet G, 2003; Zhao D,2007). The Hainan plume was imaged based on the highresolution crust-mantle velocity model conducted in the SCS,(Lei J et al., 2009, Fig. 3). In 2014, the International Ocean Discovery Program (IODP) Expedition 349 drilled through the sedimentary layers and cored seafloor basalts. The subsequent analysis indicated that the Hainan plume has the characteristic of Indian-type mantle source. At the same time,the eastern and western sub-basin have obviously different mantle characteristics. All above features observed suggested Hainan plume and the continent were eroded by the crust while they are falling apart. Hainan plume may promote the opening of the SCS based on the abnormal characteristics.(Zhang GL et al., 2018).
2.5. Dextral strike-slip pull-apart model
Zhou D et al. (2002) concluded that the opening of the SCS was a result of the strike-slip pull-apart on the continental margin of East Asia, driven by the retreat of the Pacific Subduction Zone, the south-east mantle flow caused by the collision of the Indian subduction northward beneath the Eurasian plate, together with the NNW-direction subduction and collision of the Indo-Australian plate. It considered that the opening of the SCS could be divided into two stages: NNE-trending strike-slip faults act as a major fracture zone system during the ESB and NWSB opening under the NNE-SSW-direction extension at 34-23 Ma; The SWSB started its opening under the NW-SE-direction extension due to the slab pull of the proto-SCS and the extension along the trailing edge of the Reed-Palawan Block(Fig. 1). The spreading for all the sub-basins stopped synchronously at about 15.5 Ma, just after the closure of the proto-SCS when the Dangerous Grounds collided with Borneo Block (Li SZ et al., 2012; Wang PC et al., 2017).

Fig. 2. Paleogeographic reconstructions of SE Asia. a-Approximately 16 Ma, prior to the end of the SCS seafloor spreading; b-approximately 32 Ma, prior to onset of the SCS seafloor spreading, modified from Leloup PH et al. (2001). India-Asia collision model. A large-scale sinistral strike-slip occurred in the Ailaoshan-Red River shear zone between 32-16 Ma. The time of the strike-slip coincided with the time of the formation of the SCS, and the distance of the strike-slip coincided with the expansion of the SCS.

Fig. 3. Map view of Hainan plume by P-wave velocity perturbations (in %), modified from Lei J et al. (2009). Hainan plume beneath Hainan island, extending from the surface down to 250 km depth with a diameter of about 80 km. The section location sees Fig. 1.
3. Deep-interior geological and geophysical investigation in the SCS
Deep structure is the window to understand the characteristics of continental margin structure. The deep structure of the SCS contains important information about the formation and evolution of the SCS basin (Hao TY et al.,2011; Zhao MH et al., 2011). The migration and distribution of matter in the upper crust are closely related to some deep tectonic activities (Lu BL et al., 2018). At present, previous researchers have carried out a series of deep geological and geophysical studies in the SCS, and discovered many important deep structural features based on the methods of gravity and magnetic inversion, deep seismic and scientific ocean drilling.
3.1. International Ocean Discovery Program (IODP)
Five ODP/IODP Expeditions have been carried out in the SCS (Wang PX, 2019; Fig. 4): IODP Expedition 349 drilled through the Cenozoic basin sediments, and acquired basalts of the basin basement; IODP Expeditions 367/368/368X studied the COT zone in the northern margin of the SCS, explored rifting and its transformation to seafloor spreading, and obtained basalts during the seafloor spreading period in the oceanic crust (Wang PX, 2019). However, recent IODP Expeditions 349, 367, 368, and 368X did not directly address the mechanisms that triggered SCS development (Li CF et al.,2019). In addition, as of yet, the deepest drilling hole is approximately 1700 m, which is not enough for deep structure study.
3.2. Gravity and magnetism inversion calculation
Gravity and magnetic data have the advantages of easy acquisition and wide coverage among geophysical investigations. They have been widely used in deep structural study of the SCS (Feng XL et al., 2018). Gravity and magnetic inversion are both important methods to study the basin basement, Moho, and crustal density of the SCS (Hao TY et al., 2011; Pichot T et al., 2014; Guan DL et al., 2016;Wu ZC et al., 2017; Chen M et al., 2018). Yang SX et al.(2015) calculated gravity anomaly in the SCS (Fig. 5a) based on the regional geological survey of the SCS, combined with ship gravity and satellite gravity. Through multiple forward and inversion iterations between Moho gravity anomaly and theoretical calculation anomaly, the Moho depth of the whole SCS was obtained. The Moho depth of the central SCS basin is less than 6000 m (Fig. 5b). However, due to the low resolution of gravity and magnetic inversion, it is impossible to reveal the refined structure of deep crust.

Fig. 4. Deep-interior geological and geophysical investigation in SCS. ESP, Expanding spread profile; MCS, Multichannel seismic; OBS,Ocean bottom seismometer; LH OBS, Joint onshore-offshore seismic prospect; OBS 3D, three-dimensional OBS; Ocean drilling program(ODP)/IODP sites modified from Wang PX (2019); OBS survey lines refer to Yan P et al. (2001), Qiu XL et al. (2001, 2011), Wu SM et al.(2009), Wang TK et al. (2006), and Zhao MH et al. (2010, 2011, 2018a, 2018b); OBS 3D exploration refer to Zhao MH et al. (2018b); LH OBS refer to Xu HL et al. (2012), Qiu XL et al. (2003) and Huang HB et al. (2011); ESP lines refer to Yao BC et al. (1994) and Nissen SS et al.(1995); Red dashed MCS lines refer to internal data of Guangzhou Marine Geological Survey, the black dashed MCS lines (N3, N4) refer to Ding WW et al. (2018).
3.3. Deep seismic exploration
Among series of deep structure research methods,artificial deep seismic exploration has always occupied an important position due to its high-resolution and wide applications (Zhao MH et al., 2011; Zhang GX et al., 2018).Deep seismic profiles can directly reveal the lithospheric structure, including sedimentary basement structure, basin structure and Moho. Seismic tomography can directly reveal the details of the lower crust and upper mantle structure by revealing the three-dimensional velocity structure (Li SZ et al., 2012). In addition, deep seismic velocity structures are the basis for building the formation and revolution of the SCS(Zhao MH et al., 2018b).
3.3.1. Expanding spread profile exploration
Nissen SS et al. (1995) studied the crustal thickness of the eastern and western continental margins of the northern SCS by Expanding Spread Profile (ESP) exploration (Yao BC et al., 1994; ESP-W, ESP-C and ESP-E profiles, Fig. 4), and analyzed the high-density layers in the lower crust. It was concluded that the high-density layers in the lower crust of the ESP-E came from the extensional crust and partly due to the pre-existing high-density minerals in the lower crust.
3.3.2. Ocean bottom seismometer exploration
Ocean Bottom Seismometer (OBS) is an important technology of deep crustal research applied in the SCS since the 1990s. Especially in the past two decades, OBS surveys flourished from northern to southern SCS, then moved to the central SCS. The survey patterns developed from 2D straight lines to 3D grid lines (Fig. 4). These surveys and studies have provided invaluable information on deep crustal structures and evidences for the formation and evolution theories of the SCS. Velocity anomalies with special tectonic significance such as high-velocity layer and low-velocity layer have been identified (Yan P et al., 2001; Wang TK et al., 2006; Zhao MH et al., 2004, 2010), and three types of crustal stretching styles in the northern margin of the SCS were identified (Bai YL et al., 2019). These opinions greatly enrich the understanding of deep structural characteristics of the northern and southern continental margins of the SCS.However, up to now, OBS surveys are mainly carried out in the northern continental margin of the SCS, with only a few investigations in the central ocean basin and southern continental margin, especially in the ESB (Fig. 4).

Fig. 5. a-Bouguer gravity anomaly map of the SCS; b-Moho undulations of the SCS derived from the gravity inversion method, modified from Yang SX et al. (2015).
3.3.3. Joint onshore-offshore seismic prospect
The onshore-offshore seismic exploration is a new technology which receives air-gun signals of both land seismic stations and OBS at the same time. These have filled the gaps in deep crustal structure beneath the onshoreoffshore transitional zone (Xu HL et al., 2012). Qiu XL et al.(2003) tried the first joint onshore-offshore seismic survey in the SCS. It has a great significance in the study of deep crustal structure and the formation and evolution of Cenozoic sedimentary basins in the SCS (Zhao MH et al., 2004; Xia SH et al., 2008). In addition, the joint onshore-offshore seismic prospect can effectively acquire the crustal structure information below the shallow water area (Huang HB et al.,2011), which solves the problem that Multichannel Seismic Survey (MCS) cannot be constructed near islands.
3.3.4. Multichannel seismic exploration
Deep MCS survey in the SCS commenced at the beginning of this century. At that time, the length of seismic records was only nine seconds, limited by acquisition equipment and acquisition technology, and the investigation area was mainly within the continental slope area. After 2008,with the research and development of long-array, largevolume source and broadband source, the Guangzhou Marine Geological Survey carried out the multichannel seismic survey of 60 km ×120 km in the central SCS basin and obtained approximately 6000 km of two-dimensional deep reflection seismic profiles, which crossed the conjugate continental margin and ocean basin (Fig. 4). In recent years,joint MCS and OBS deep structural exploration has been carried out, and approximately 1256 km deep reflection profiles across the western SCS and the SWSB have been obtained (Fig. 4). Multichannel seismic survey not only obtains a large amount of raw data of deep crustal reflection,but also identifies the deep Moho reflection in the SCS. It also identifies the stratigraphic records of the SCS basin, the COT zone and the spreading ridge (Ding WW et al., 2018).
4. Significance and directions of deep structural research in the SCS
4.1. Seafloor spreading geodynamics of the SCS
The difference among the formation and evolution models of the SCS lies in the geodynamic mechanisms causing the seafloor spreading. The SCS is situated in a special geotectonic position where multiple plates interact with each other. It has a complex evolutionary history and should take the interaction of various factors into account. At present,more and more viewpoints tend to be that the formation and evolution of the SCS is the passive spreading under complex actions (Morley CK, 2002; Luan XW and Zhang L, 2009).
Seafloor spreading model considers that slab-pull arising from subduction of the proto-SCS under northwest Borneo,which triggered continental rifting and seafloor spreading.Opening ceased when the Dangerous Ground collided with northwest Borneo (Holloway NH, 1982; Taylor B and Hayes DE, 1980, 1983; Hall R, 1996, 2002; Hall R and Breitfeld H,2017). India-Asia collision and extrusion model considers that motive force for the opening of the SCS comes from the subduction and collision of the Indian and Eurasian plates(Tapponnier P et al., 1982, 1990). With the historical first acquisition of oceanic crustal basalts formed during the expansion period of the SCS by IODP Expedition 349 in 2014, the study on the formation and evolution of the SCS has entered a new period (Li CF et al., 2015). Based on coring and seismic data obtained, Larsen HC et al. (2018) suggested that a major rifting event within thin lithosphere permitted mantle upwelling, yielding abundant MORB-type melts during final breakup and early seafloor spreading, and resulted a narrow and fast rift-to-drift transition along the northern SCS (Fig. 6).In addition, the seafloor spreading of the SCS was pushed from east to west (Li CF et al., 2015), the oblique subduction of the western Pacific plates caused the SCS to split along strike-slip faults (Wang PX, 2019), and the Hainan plume promoted the opening of the SCS (Zhang GL et al., 2018).
In summary, the geological processes of SCS are too complicated to establish a universally applicable model of tectonic evolution. Currently, there is even no similar models for reference (for example, North Atlantic). It is widely believed that the formation and evolution process of the SCS should be the passive spreading under complex actions. The subduction and slab-pull of the proto-SCS, the subduction and collision of the Indian-Eurasian plate, and the oblique subduction of the western Pacific plates should all play a certain role in different periods of the opening of the SCS.The current research status of the geodynamic mechanism definitely requires further studis.
4.2. Coupling relationship between deep process and shallow oil-gas and hydrate resources
The formation and evolution of petroliferous basins are mainly controlled by the deep processes of the earth. The latter generally represents the formation mechanism, gestates the structural attributes, and restricts the thermal evolution of the basin (Lu BL et al., 2016). Basin evolution and deep processes are closely related to the occurrence, enrichment and distribution of energy minerals such as oil and gas (Li ST,1995; Song XD et al., 2004). Sedimentary basin analysis pays more and more attention to the relationship between deep processes and shallow surface processes (Xie XN et al.,2012). Lu BL et al. (2016) proposed a preliminary model of the deep processes and their coupling relationships with the petroliferous basins in the SCS (Fig. 7). However, there are still great uncertainties or controversies about the effect of deep processes on the basins and the distribution of oil and gas. The coupling relationship between petroliferous basins and deep processes is not yet clear. Establishing deep structural process models is the key to clarifying the relationship between the oil/gas resources and the deep structure and processes in the SCS.
4.3. Problems and research directions
With the continuous exploration of the deep structure of the SCS by scientific ocean drilling and deep seismic survey,more and more opinions of the formation and evolution of the SCS has been gained. Deep seismic survey is a highresolution and reliable method. However, most of the deep seismic surveys are conducted in conjugate continental margins of the SCS. There is a few seismic profiles across the southern continental margin and the central SCS basin(especially the ESB, Fig. 4). The crustal structure, to the south of the central abandoned spreading ridge, has not been identified yet (Ding WW et al., 2018; Fig. 6). There is no intuitive understanding of the deep structure of the SCS.Under the guidance of the “Deep-Earth ” science and technology innovation strategy of the Ministry of Natural Resources, and based on the scientific problem orientation and energy strategic needs, the following research directions are proposed:

Fig. 6. Continental breakup and seafloor spreading model of the SCS, modified from Larsen HC et al. (2018) and Ding WW et al. (2018). a-A deep basin with thin crust existed within the final zone of plate rupture and hosted magmatism at the Eocene-Oligocene transition. b-ascending melts rapidly weakened the mantle lithosphere. c-seafloor spreading initiated at 32 Ma, the first ridge jump occurred at about 27 Ma. d-seafloor spreading continued. The second southward ridge jump event occurred at about 23.6 Ma. e-seafloor spreading final cessation at about 16 Ma.The locations of magnetic anomalies and abandoned spreading ridges are shown in Fig. 1.

Fig. 7. Deep processes and their coupling relationships with the petroliferous basins in the SCS, modified from Lu BL et al. (2016).
(i) Processing, analysis and research of long array-large volume deep-reflection seismic, gravity, magnetic and OBS data; focusing on high-resolution imaging technology of ocean deep-reflection seismic data (Zhao B et al., 2019b,2019c), high-precision tomographic velocity inversion technology of OBS, and data fusion processing technology of MCS and OBS. Carrying out joint gravity-magnetic-seismic inversion, constructing fine crustal structures profiles in different regions of the SCS, and systematically interpreting the formation and evolution of the SCS.
(ii) Studying Moho spatial distribution by deep seismic reflection in SCS basin. China plans to build hydrate drilling vessel (Ocean drilling vessel) in 2021, which will make it possible to reach the Moho surface in the SCS. Implementing the Moho drilling program in the SCS will reveal the lower crust and upper mantle structure, will explore the controlling role of deep processes on the evolution of sedimentary basins,and will reveal the types, properties and spatial regularities of Moho reflection. This will provide the most powerful support for the deep structure study of the SCS.
5. Conclusions
Deep crustal structure of the SCS contains important information about the formation and evolution of the SCS.Currently, the coverage of deep seismic exploration is limited,which restrains our knowledge of the characteristics of deep structure of the SCS as well as restricts the study of the geodynamic mechanism of the seafloor spreading. The authors propose that high resolution deep structural sections in different regions of the SCS should be constructed to systematically interpret basin evolution processes and its geodynamic mechanism by deep structural information. Deep structural information should be obtained through data fusion processing of MCS and OBS, joint gravity-magnetic-seismic inversion and Moho drilling.
Acknowledgment
The authors appreciate to the anonymous reviewers gave valuable suggestions and comments on the manuscript. This study was financially supported by the Key Special Project for Introduced Talents Team of Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou)(GML2019ZD0207, GML2019ZD0208), and the China Geological Survey Program (DD20191007).
杂志排行
China Geology的其它文章
- 2018 annual report on China oil and gas resources exploration and exploitation
- Building an Up-and-Coming City - An overview of the Geological Data Sharing Service Platform of the Xiongan New Area
- Discovery of hydrocarbon source rocks in the Permian Xinxing Formation in the southern Zhangguangcai range, Northeast China
- Zircon U-Pb age of Fengxian acid pyroclastic rocks and its enlightenment to the existence of Pan-African orogeny in the West Qinling Orogenic Belt, China
- A review and research on comprehensive characterization of microscopic shale gas reservoir space
- Investigation and numerical simulation of summer sedimentation in Jiaozhou Bay,China
