基于FPGA技术的多路并行通信信号采集系统
2018-10-12赵飞燕蔺勇
赵飞燕 蔺勇
摘 要: 为解决传统通信信号采集系统信号采集强度低的问题,设计了基于FPGA技术的多路并行通信信号采集系统。对多路并行通信信号采集模拟电路进行优化,降低信号采集过程中受到的干扰。结合模糊规则原理对多路通信信号采集流程进行简化处理;利用十字交叉路口信息采集理论设计通信系统相位采集控制,优化通信系统信号采集神经网络,实现对多路并行的信号采集。实验结果证实,基于FPGA技术的多路并行通信信号采集系统比传统系统的采集强度提高了10%以上,从而验证了系统的有效性。
关键字: 自适应控制; 仿真模拟; FPGA技术; 通信频率; 信号采集; 多相位控制
中图分类号: TN911?34; U665 文献标识码: A 文章编号: 1004?373X(2018)19?0027?04
Abstract: A multi?channel parallel communication signal acquisition system based on FPGA technology was designed to improve the signal acquisition intensity of the traditional communication signal acquisition system. The analog circuit of the multi?channel parallel communication signal acquisition is optimized to reduce the interference existing in the signal acquisition process. The fuzzy rule principle is combined to simplify the acquisition process of multi?channel communication signal. The intersection information acquisition theory is used to design the phase acquisition control of the communication system, optimize the neural network for signal acquisition of the communication system, and realize the multi?channel parallel signal acquisition. The experimental results show that the signal acquisition intensity of the multi?channel parallel communication signal acquisition system based on FPGA technology is increased by 10% than that of the traditional communication signal acquisition system, which can verify the effectiveness of the proposed system.
Keywords: adaptive control; simulation; FPGA technology; communication frequency; signal acquisition; multi?phase control
0 引 言
通信信号采集系统在信息的传输和接收过程中易受到外界因素的干扰,难以保障通信信息的准确采集和传输,一旦在多路并行的复杂路段出现通信问题,易造成严重的交通拥堵现象,甚至威胁驾驶人员的生命安全。传统数据采集系统采取单片机来控制主要系统模块,完成数据信号的采集,该系统速度性能相对较差,难以保障系统运行的实时性[1]。随着射频技术、无线通信等技术的快速发展,利用FPGA技术进行信号采集,可有效提高系统的工作速度和效率。因此本文设计基于FPGA技术的多路并行通信信号采集系统,解决当前数据信号采集系统中存在的问题。实验结果显示,基于FPGA技术的多路并行通信信号采集系统不仅在性能上优于传统的单片机控制采集系统,在数据处理方面也十分强大,具有广阔的应用前景。……
