基于单片机控制的电热炉温控系统
2018-09-10张少杰
张少杰
摘 要:本文主要利用基于单片机的电热炉温控系统,对其总电路和触发线路进行重新架构,该系统主要包括REGHC51单片机、热敏电阻、温度检测仪、电路转换器、双向晶闸管触发及开关电路。与传统电热炉温控系统相比,具有操作方便、耐久度高、更易检修、可靠性高和数据误差小等优势。
关键词:单片机;电热炉;温控系统
中图分类号:TP273 文献标识码:A 文章编号:1003-5168(2018)17-0073-02
Temperature Control System of Electric Heating Furnace based on
Single Chip Microcomputer Control
ZHANG Shaojie
Abstract: This paper mainly used the temperature control system of electric heating furnace based on single chip microcomputer, and restructured its total circuit and trigger circuit. The system mainly included REGHC51 single chip, thermistor, temperature detector, circuit converter, bidirectional thyristor trigger and switch circuit. Compared with the traditional electric stove temperature control system, the system has the advantages of convenient operation, high durability, easier maintenance, high reliability and small data error.
Keywords: single chip microcomputer;electric heating furnace;temperature control system
1 整体电路的系统架构
整体电路系统架构由REGHC51单片机温度控制系统、温度控制器、温度传感器、电路转换器、温度显示器、声光变阻器和晶闸管电路启停装置组成。主电路主要运用晶闸管电路启停装置作为交流电源的控制开关,控制整个电路的工作状态,运用阳极电流的通断影响极小的门极电流,解决了传统温控电路正中控制电炉丝接触器的接触点连接的黏性、损害、声音大等不足[1]。
1.1 系统采用REGHC51单片机的优势
采用REGHC51单片机对温度进行控制,基于其操作方便、组合方式灵活的特点,有利于提高温度控温的技术指标,从而提高整个电路对温度变化的灵敏性。该单片机程序会对三相电路产生的波动数字信号数据进行有效性判断,按照不对称三相电路选择VT1、VT2、VT3的额定电压和电流参数。
1.2 主电路系统原理
普通的电热炉温度传感器中的电路设计结构,一般是由交流电开关触发器决定电热炉的电路通断。交流电开关触发器由于电路的通断频率较大,导致温度传感器中的数据发生变化,进而使电热炉中的温度存在较大变动,这就与实际需求不相符。……
