农谷路上跨南同蒲铁路立交桥设计
2018-07-28李帅
李帅
摘 要:南同蒲铁路大桥主桥采用(83+80)m预应力混凝土单T钢构连续梁桥,桥面宽24.5m。为减少施工期间铁路的运营安全并尽量减少对铁路的干扰[1],该桥采用转体法施工(转体重量1.5万t,转体角度为49.27°)。该桥采用单箱三室截面,矩形实体墩,钻孔灌注桩基础,转体系统由转体下盘、球铰、上转盘、转动牵引系统组成。对主梁整体结构、横梁横向静力、桥面板横向静力、转体系统分别进行计算,结果表明该桥的各项指标均满足规范要求。
关键词:单T钢构;上跨既有铁路;转体施工
中图分类号:U448.17 文献标志码:A 文章编号:2095-2945(2018)20-0096-03
Abstract: The main bridge of Nantongpu Railway Bridge is composed of (83+80) m prestressed concrete single T rigid frame continuous beam bridge with a width of 24.5m. In order to reduce the safety of railway operation during construction and reduce the interference to railway as far as possible, the bridge is constructed by rotation method (the weight of rotation is 15,000 t, the angle of rotation is 49.27°). The bridge is composed of a single box with three sections, rectangular solid piers, bored pile foundation, and the rotary system is composed of the rotary footwall, the ball hinge, the upper rotary disc and the rotary traction system. The whole structure of the main beam, the transverse static force of the crossbeam, the transverse static force of the deck plate and the rotating system are calculated respectively. The results show that all the indexes of the bridge meet the requirements of the code.
Keywords: single T rigid frame; upper span existing railway; rotary construction
1 工程概况
新建农谷路项目在太谷县城区西部区域,南同蒲铁路大桥是农谷路项目的关键工程,采用(83+80)m预应力混凝土单T刚构桥跨越108国道及南同蒲铁路。
2 主要技术标准[2]
道路标准:城市主干路;桥梁宽度:24.5m;设计行车速度:60km/h;桥面横坡:2%;设计荷载:汽车荷载,城-A级,跨铁路主桥活载提高30%;抗震设计标准:地震动峰值加速度0.15g,特征周期0.40s,相当于地震基本烈度Ⅷ度区;桥下净空:既有南同蒲铁路净高≥7.96m,既有108国道≥5m;桥梁结构设计基准期:100年;桥梁结构设计使用年限:100年。
3 方案设计
平面设计:道路平面线形采用道路中心线走向,主线桥位于直线上,道路主线通过桥梁跨越108国道和南同蒲铁路。108国道及南同蒲铁路上跨桥采用“斜交正做”,桥轴线与南同蒲铁路和G108的交叉角度分别为49.27°和51.98°。
纵断设计:纵断面设计主要考虑南同蒲铁路净空、运营安全距离和构筑物的后期沉降等因素,立交净空不小于8.3m,纵坡采用0.5%,并在变坡点处设置相应的竖曲线。……
