304奥氏体不锈钢晶间腐蚀敏感性的非线性超声表征
2017-10-17侯天宇李廷举
侯天宇,李 萍,陈 雷,赵 杰,李廷举
(大连理工大学 材料科学与工程学院,辽宁 大连 116024)
304奥氏体不锈钢晶间腐蚀敏感性的非线性超声表征
侯天宇,李 萍,陈 雷,赵 杰,李廷举
(大连理工大学 材料科学与工程学院,辽宁 大连 116024)
利用非线性超声检测技术并辅助于XRD与微观组织分析,探讨了在650℃经过2,6,10h敏化处理的304奥氏体不锈钢样品非线性超声特征参数的变化规律。结果表明:随着敏化时间的延长,归一化非线性系数单调增大; 相比于固溶试样,经2,6,10h敏化处理后样品的归一化非线性系数分别增加28%,32%,43%,意味着以非线性系数表征304不锈钢的敏化度是可行的。分析认为:晶界析出碳化物(Cr23C6)与奥氏体基体产生的错配引发了局部应变场,干扰了超声波的传播;此外,随敏化时间延长,析出相的增加进一步加剧了超声波的畸变。
不锈钢;敏化;非线性超声;晶间腐蚀
Abstract: The variation law of nonlinear ultrasonic parameters for the samples sensitized at 650℃ for 2, 6, 10h was discussed using nonlinear ultrasonic testing technique and XRD pattern as well as microstructure. The results indicate that normalized nonlinear parameters(β/β0) of the samples show a monotonous growth trend with the increase of the sensitized time, and normalized nonlinear parameters(β/β0) of the samples sensitized with 2,6,10h increase to 28%, 32% and 43% respectively compared with that of the base material, meaning that it is feasible to use nonlinear parameter to characterize the sensitivity degree. It is analyzed that the mismatch between the carbide (Cr23C6) precipitated on the grain boundary and the austenitic matrix causes the local strain fields which interfere with the propagation of ultrasonic wave in the solid sample. In addition, the increment of precipitation phase exacerbates further the distortion of the ultrasonic with prolonging of the sensitization time.
Keywords:stainless steel;sensitization;nonlinear ultrasound;intergranular corrosion
奥氏体不锈钢因其优良的机械特性、耐蚀性、耐热性以及良好的可焊性和加工性能,被广泛应用在机械冶金、石油化工以及核工业设施中[1]。但是在450~800℃进行较长时间热处理或焊接时,就会造成碳化铬(Cr23C6)沿奥氏体晶界析出,导致晶界部位贫铬,这种现象称为敏化。敏化后的不锈钢容易发生晶间腐蚀,这种腐蚀行为会降低晶粒间的结合力,造成材料力学性能恶化而产生突发性破坏[2]。调查发现很多奥氏体不锈钢失效事故均是由晶间腐蚀引起的[3,4],因此对经过热处理或焊接后的不锈钢材料进行晶间腐蚀敏感性检测可以有效保证机械设备安全可靠的运行。……
