基于九开关级联的多端口能馈型高压变换器
2017-10-12查晓明宫金武孙建军
查晓明,王 盼,2,刘 飞,宫金武,孙建军,黄 萌
(1.武汉大学电气工程学院,武汉 430072;2.湖北省电力公司技术培训中心,武汉 430079)
基于九开关级联的多端口能馈型高压变换器
查晓明1,王 盼1,2,刘 飞1,宫金武1,孙建军1,黄 萌1
(1.武汉大学电气工程学院,武汉 430072;2.湖北省电力公司技术培训中心,武汉 430079)
为解决工业现场中高压大容量电机群负荷的驱动及再生能量利用问题,提出一种基于九开关逆变器单元级联的多端口能量回馈型高压变换器。通过与现有三相桥式逆变器级联技术对比,分析适用于九开关逆变器的级联方法。详细分析了新变换器拓扑结构、功率分配模式、控制策略及优缺点,并以6单元级联双负载端口的6 kV高压变换器为例,通过Matlab仿真验证了该拓扑及控制策略的可行性和有效性。该变换器为负载端口间的再生能量提供了直接传递通道,降低了能量回馈压力;且大幅减少了开关、电容以及变压器绕组数量,提高了可靠性;其端口扩展灵活,对于多负荷工况具有较强的适应性。
九开关;级联变换器;多端口;再生能量;能量回馈
Abstract:In order to drive multiple motors in the medium-voltage high-power industrial field and recycle the regenerative energy,a regenerative multi-port converter is presented,which is cascaded with several cells based on nineswitch inverter.Comparing with the existing cascaded technology of three-phase bridge inverter,a cascaded method which is suitable for nine-switch inverter is proposed.Then,the new converter topology,power distribution mode,control strategy and comparison of advantages and disadvantages are analyzed.A 6 kV two output-port cascade converter with six nine-switch cells is taken as an example,which has been tested in Matlab/Simulink,to verify the feasibility and validity of the topology and control strategy.The converter provides a direct transfer path for regenerative energy among multi-port loads to reduce energy feed-back pressure.Meanwhile,the number of switches,capacitors,and transformer windings are reduced,which can improve reliability.Moreover,the converter is well-adapted to the multi-loads industrial fields for the output-port extended flexibly,and the converter is well-adapted to the multi-loads industry fields.
Keywords:nine-switch;cascade converter;multi-port;regenerative energy;energy feedback
随着能源危机的日益严峻,中高压大容量电机群负载的节能要求逐渐提高。H桥级联多电平变换器因其单元模块相似、易于扩展和更换、输入输出电流谐波含量低等优点,得到了广泛应用[1-3]。针对再生能量的回收,目前主要有两种改进方式:采用PWM前端使能量回馈电网[4-8]和采用储能设备回收能量再利用[9-12],二者均基于传统H桥级联结构改造,此类拓扑仅能驱动一台或多台电机同步运行。……
