APP下载

四轮轮毂电机驱动电动汽车建模与联合仿真

2017-10-12葛平淑赵秀春崔艳秋

大连民族大学学报 2017年5期
关键词:汽车模型

葛平淑,张 涛,赵秀春,崔艳秋

(大连民族大学 a.机电工程学院 b.信息与通信工程学院,辽宁 大连 116605)

四轮轮毂电机驱动电动汽车建模与联合仿真

葛平淑a,张 涛a,赵秀春a,崔艳秋b

(大连民族大学 a.机电工程学院 b.信息与通信工程学院,辽宁 大连 116605)

利用Carsim和Matlab/Simulink搭建驾驶员闭环控制的四轮轮毂电机独立驱动电动汽车仿真模型;根据轮毂电机驱动电动汽车特点,建立轮毂电机模型、速度控制模型和整车模型;设计横摆力矩控制器和力矩分配控制策略,实现联合仿真的接口设置;最后利用双移线工况验证了所开发模型的正确性和转矩分配策略的有效性。

轮毂电机;电动汽车;模型;转矩分配;联合仿真

Abstract:To develop stability control algorithm and torque distribution strategy, a simulation model of in-wheel-motor-driven electric vehicles with closed-loop control of driver was established based on co-simulation of Carsim and Matlab/Simuink. According to the characteristics of in-wheel-motor-driven electric vehicles, the in-wheel-motor model, driver speed control model and the vehicle model was established respectively. The yaw moment controller and the torque distribution strategy were designed based on slide control theory, and the interface of co-simulation was set. Finally, the performance of the model and the torque distribution strategy were evaluated by double lane change test.

Keywords:in-wheel-motor; electric vehicle; model; torque distribution; co-simulation

四轮轮毂电机独立驱动电动汽车是当前国内外纯电动汽车领域研究的热点之一,其主要结构特征是将动力驱动电机直接安装在驱动轮内,具有输出力矩独立可控、传动效率高、结构紧凑等优点。与传统内燃机汽车相比,四轮轮毂电机驱动电动汽车的动力输出可以单独控制,其各车轮转矩可在电机能力范围内按照任意比例分配,实现滑移率和横摆力矩的控制。在动力性、稳定性及安全性方面具有更大的技术潜力[1-2],可以显著提高其适应恶劣道路环境的通过能力,其独特的驱动方式和巨大的发展潜力受到广泛研究和关注。

由于四轮毂电机驱动电动汽车独特的技术特点,一些在传统内燃机汽车上开发成熟、应用广泛的汽车安全和智能控制技术并不能直接应用在该类型电动汽车上[3-4]。……

登录APP查看全文

猜你喜欢

汽车模型
一半模型
重尾非线性自回归模型自加权M-估计的渐近分布
2019年8月汽车产销环比增长 同比仍呈下降
3D打印中的模型分割与打包
汽车们的喜怒哀乐
FLUKA几何模型到CAD几何模型转换方法初步研究
3D 打印汽车等
一个相似模型的应用