油田开发井组产层分层动用新方法研究
2017-10-11于家义张中劲刘长地
谢 军,于家义,张中劲,刘长地
中石油吐哈油田分公司勘探开发研究院,新疆 哈密
油田开发井组产层分层动用新方法研究
谢 军,于家义,张中劲,刘长地
中石油吐哈油田分公司勘探开发研究院,新疆 哈密

针对开发井组监测资料不足、分层动态分析难度大等多层系合采油田,提出以井组内注采平衡为依据,利用岩心驱替实验所得PV倍数与含水率关系曲线、无因次指数进行井组产层动用情况的研究方法。该方法视井组为一个统一整体,充分考虑了注水井与受效油井的影响因素(包括油层厚度、渗透率、原油黏度、地应力方向、注采井距、生产压差、改造措施等),通过平面和垂向系数合理劈分注水井分层注水量,计算油井各小层分层产量。运用该方法计算了X油田近300口水井分层吸水量和油井分层产夜量,与现场实测剖面结果相符,表明该方法可靠。
注采平衡,PV倍数与含水率关系曲线,无因次指数,注水量,产液量,劈分
Copyright © 2017 by authors, Yangtze University and Hans Publishers Inc.
This work is licensed under the Creative Commons Attribution International License (CC BY).
http://creativecommons.org/licenses/by/4.0/


Received: Jun.13th, 2017; accepted: Aug.25th, 2017; published: Oct.15th, 2017
AbstractFor multiplayer commingled producing oilfields with insufficient monitoring information, difficult dynamic analysis on separating layers, so based on injection and production balance of the well group, this paper proposed a method using the relationship curves of PV multiplier and water cut from the laboratory experiment and dimensionless index to analyze the reservoir producing condition.By taking the well group as a unified entirety, and the factors affecting injection wells and response wells (reservoir thickness, permeability, viscosity, in site stress direction, injection-production space, producing pressure drop, and stimulation measures)into account, the method calculates oil production of each separate layer by reasonably allocating the injected water of each layer based on the horizontal and vertical coefficient.The water absorbing volume and oil well liquid production by layer separation of 300 wells in X Oilfield calculated by this method are consistent with actual measurement results, it is proven that the method is reliable.
KeywordsInjection and Production Balance, PV Multiple and Water-Cut Curve, Dimensionless Index,Water Injection Rate, Liquid Production Rate, Split
1.引言
油田进入高含水中后期开发阶段后,注水井的层间矛盾和平面矛盾日益严重,地下情况更加复杂,只有充分认清油、水井分层动用情况,才能采取切实可行的分层调整及挖潜措施,从而提高油田的开发水平。因此,提出了油、水井分层注水量和产液量研究。传统方法主要采用产吸剖面劈分法、KH值劈分法、井组注采平衡劈分法[1]-[6]及数模等。产吸剖面劈分法最为准确,但是测试成本高;KH值劈分法仅在建产初期较为合适;井组注采平衡劈分法仅可对分层产液进行劈分,无法计算分层含水,即计算的分层产液比和产水比相等,分层含水等于单井含水。……
