基于FPGA的无线图像传输系统硬件设计与实现
2017-07-19齐建中
乔 颢,齐建中,宋 鹏
(北方工业大学,北京 100144)
基于FPGA的无线图像传输系统硬件设计与实现
乔 颢,齐建中,宋 鹏
(北方工业大学,北京 100144)
针对图像传输过程中的多路径、非通视和高速移动等特点,提出了一种FPGA+W5300架构的COFDM无线图像传输系统,实现图像的无线发射和接收。该架构中采用Xilinx公司Spartan-6系列的XC6SLX150 FPGA作为主控芯片,用于实现COFDM数字调制、射频芯片的配置,同时为A/D转换器和D/A转换器提供工作时钟。采用W5300硬件TCP/IP协议栈通过网络进行数字信号的传输,提高数据的传输速率,外加ADL5385、LT5506等上下变频芯片及其相关外设电路,最终实现一个收发一体、发射频率可设、高灵敏度的无线图像传输系统硬件平台。测试结果表明,该硬件平台能够实现图像的无线传输,具有良好的抗多径和高动态性能。
FPGA;W5300;COFDM;硬件平台
Abstract Due to the characteristics such as multipath,non visibility and high-speed motions in image transmission,a novel structure for COFDM wireless image transmission system based on FPGA+W5300 is proposed,to achieve the wireless transmitting and receiving of image.The XC6SLX150 FPGA of Xilinx Spartan-6 family is used as the main control chip in the architecture,to implement COFDM digital modulation and RF chip configuration,as while as providing a working clock for the A/D converter and D/A converter.W5300 hardware TCP/IP protocol stack is used for digital signal transmission through the network to improve the data transmission rate.Other components includes up and down conversion chip such as ADL5385 and LT5506,and a peripheral circuit.The system realizes a wireless image transmission system hardware platform with the function of transceiver,configurable transmitting frequency and high sensitivity.Test results show that the hardware platform can realize wireless transmission of the image,and has superior performance of anti-multipath and high dynamic.
Key words FPGA;W5300;COFDM;hardware platform
0 引言
无线图像传输在民用和军事应用范围都发挥着十分关键的作用,从一般的无线视频监控到智能机器人和空中无人机等,无线图像传输都是其中十分重要的关键技术[1]。随着分辨率日益提高,视频和图像的数据量与日俱增,在有限的频谱资源中是很难进行直接传输的。一般在进入无线信道之前都需要将传输的数据进行视频和图像数据的压缩编码。然而,这些视频和图像数据在压缩编码之后对于无线信道中所引入的误码十分敏感,很难在时变的无线衰落信道中进行高速率高可靠性传输[2]。而正交频分复用(OFDM)多载波调制技术,具有频谱利用率高、抗干扰能力强、对抗多径及均衡器简单等优点,非常适合上述高速率数据的传输[3]。……
