不同温度下酸催化有机硅单体开环共聚制备含氢硅油的研究
2017-05-30周鸿易玲敏叶星星
周鸿 易玲敏 叶星星
摘要:以98%浓硫酸为催化剂,进行了八甲基环四硅氧烷(D4)与四甲基环四硅氧烷(DH4)的阳离子开环共聚并得到含氢硅油,重点考察了不同共聚温度对聚合产物转化率、含氢值及其分子量分布的影响。研究结果表明:在温度30 ℃条件下,制备得到的聚合物分子量和含氢值接近理论值,增加共聚温度对聚合物转化率的提高帮助不大,且会使聚合物的分子量分布变宽。
关键词:有机硅单体;酸催化;开环聚合;含氢硅油
中图分类号:TQ264.1
文献标志码:A
文章编号:1009-265X(2017)02-0050-04
Abstract:With 98% concentrated sulfuric acid as catalyst, this paper obtains hydrogen containing silicon oil through kation open ring copolymerization of octamethylcyclotetrasiloxane (D4) and tetramethylcyclotetrasiloxane (DH4) and investigates the influence of different copolymerization temperature on polymerisate conversion rate, hydrogen containing value and its molecular weight. The research result shows that molecular weight and hydrogen containing value of polymer prepared at 30 ℃ are approximate to theoretical value. The increase of copolymerization temperature is not of great help to the improvement of polymer conversion rate and will widen the distribution of molecular weight of polymer.
Key words:organsilicone monomer; acidic catalysis; ring opening polymerization; hydrogen containing silicone oil
改性硅油、有机硅织物整理剂等硅油二次加工品广泛应用于纺织工业。而含氢硅油或聚甲基氢硅氧烷(PHMS)是制备改性有机硅聚合物的重要原料,利用硅氧烷主链上反应活性较强的Si—H键,可制备不同结构的功能性整理剂,如长链烷基硅油[1]、氨基改性硅油[23]、聚醚改性硅油[45]及环氧改性硅油[6]等。就目前而言,制备含氢硅油的途径有很多种。其中,共水解缩合法制备时需要在有机氯硅烷水解時加入溶剂稀释降低反应速率,而溶剂的气味难以去除影响产品的质量[7];先醇解后水解缩合法生产成本高,反应步骤繁琐,不适合工厂大量生产[8];而开环共聚法制备反应条件温和、工艺流程较简单、产品品质较好,是一比较理想的合成方法[9]。
然而,含氢硅油的分子量和含氢值的多少直接影响改性后聚合物的应用性能[10],因此控制含氢硅油的分子量和含氢值非常重要。目前,含氢硅油一般在浓硫酸催化下,通过八甲基环四硅氧烷(D4)与四甲基环四硅氧烷(DH4)的阳离子开环共聚得到[9]。……
