汽车零件装配连接方式设计对装配效率的影响
2017-05-30蒋成姣孙军华李林
蒋成姣 孙军华 李林
摘要:目前,汽车行业蒸蒸日上,在汽车制造业中存在多种零件的装配连接,不同零件装配连接方式对装配效率产生不同的影响,文中分析了汽车制造中应用较多的几种装配连接方式,利用MTMUAS预测标准工时分析系统,分别制定了螺栓螺母、螺钉、拉钉装配以及卡接的装配工时,得出4种连接装配的装配效率并且对4种连接方式的装配工时得出一个固定标准模块,形成一套合理规范简洁的装配工时分析系统。最后利用面向装配的设计(DFA)和MTMUAS对仪表板连接方式进行优化设计,对改进前后的设计进行装配工时对比。关键词:面向装配的设计;MTMUAS;装配连接方式;装配工时
中图分类号:U 461文献标识码:A文章编号:1672-7312(2017)04-0383-06
Abstract:At present,the automobile industry is thriving.There are many parts of the assembly connection in auto manufacturing.Connection way of different parts assembly has an effect on the efficiency of assembly.The Paper analyzed several assembly connection modes in automobile manufacturing,and using MTMUAS forecast analysis system of standard time,set up the bolt and nut,screw,rivet assembly and clamping assembly time respectively,studied the assembly efficiency of the four connection assembly and proposed a fixed standard module of assembly time for four kinds of connection,and put forth a reasonable,normative,simple analysis system of Assembly time.Finally,the optimization design based on design for assembly(DFA)knowledge and MTMUAS forecast analysis system at dashboard was carried out.Among them,assembly time of the design before and after improvement is calculated separately.Key words:design for assembly;MTMUAS;the connection of assembly;assembly time
0引言在制造行業中,据统计,装配任务占整个制造任务的20%~70%,平均占到了45%,装配工时在整个制造工时里有40%~60%,零件的连接方式不同,所造成的装配质量和装配工时也相差很远[1]。而面向装配的产品设计(DFA)在设计阶段分析影响产品可装配阶段的各种因素,对产品的可装配性和经济指标进行分析,及早发现问题[2]。文中通过对装配连接问题的分析,提出利用DFA技术进行装配优化工艺方法分析,运用MTMUAS方法对不同装配连接方式的零件装配工时进行估算,进行装配效率分析,对不合理的装配方式进行改进,探究不同零件装配连接方式对装配效率的影响。
1文献综述
1.1DFA面向装配的设计(Design for assembly,DFA)是在产品设计阶段保证产品生产中较好的可装配性[3]。……
