煤气化废水萃取脱酚过程的模拟研究与应用
2016-07-10冯登科
冯登科
摘 要: 煤气化含酚废水处理的达标排放一直是限制行业发展的一个瓶颈,萃取脱酚过程容易酚含量超标,而直接影响污水处理过程,为了准确模拟研究这一萃取过程,采用实际生产中的工艺参数和实验测定的水-二异丙基醚-苯酚-对苯二酚四元液液平衡数据,用Aspen软件对该过程进行了模拟,并对模拟参数进行了回归,得到了新的工艺模型。结果表明,新模型结果与实际数据误差在0.5%之内,非常准确;将模拟应用于指导工业生产,为实际生产操作和工艺改造提供了很好的技术支持。
关 键 词:煤制天然气; 含酚废水处理; 工艺模拟; 参数回归
中图分类号:TQ 018 文献标识码: A 文章编号: 1671-0460(2016)08-1873-03
Abstract: It is a bottleneck that up-to-standard discharge of phenol wastewater from coal gasification limits the industry development. The process of wastewater treatment is directly affected by excessive level of phenol content in the phenol extraction process. To simulate and study this extraction process exactly, the data were used, including some process parameters of practical production and the liquid-liquid equilibrium data for the quaternary system of water-isopropyl ether-phenol-hydroquinone determined by experiment. The process was simulated by Aspen software and its model parameters were regressed, and then the new process model was acquired. The results show that error between data determined by the new model and actual data is within 0.5%. This new model is more accurate and can be used to guide industrial production.
Key words: coal gasification; phenol wastewater treatment; process simulation; parameter regression
“十二五”期间,国家煤化工项目进行了示范性建设与探究,并取得了一定的成果。煤制天然气、油、甲醇等项目都得到了突破性的进展[1]。而近年雾霾在国内大范围漫延,环境问题日益突出,国家新环保法的实施对煤化工三废污染问题提出了严苛要求。煤气化废水成分复杂,处理困难,达标排放难度大,是限制行业发展的瓶颈[2]。
煤气化废水含有大量酚类化合物[3,4],废水中酚类物质的浓度约为4 000~8 000 mg/L。在处理这类废水的过程中,一般采用先化工分离脱除废水中的油、溶解气、酸性气、酚、氨等物质;后生化处理脱除残余有机质,使废水达标排放[5]。废水脱酚过程一般采用溶剂萃取的方法进行,对萃取过程的模拟研究有助于分析现有工艺装置,提高流程性能,改进生产操作。该模拟研究具有重要的实际意义。……
