APP下载

氮气射流低温等离子体处理对落叶松表面润湿性的影响1)

2016-05-06马东超郭明辉

东北林业大学学报 2016年4期

马东超 郭明辉

(生物质材料科学与技术教育部重点实验室(东北林业大学),哈尔滨,150040)



氮气射流低温等离子体处理对落叶松表面润湿性的影响1)

马东超郭明辉

(生物质材料科学与技术教育部重点实验室(东北林业大学),哈尔滨,150040)

摘要为了提高落叶松的表面润湿性,采用N2射流低温等离子体对落叶松表面进行处理。针对处理时间和处理高度两个因素进行单因素试验设计。通过表面接触角的测试和表面自由能的计算,分析落叶松经N2射流低温等离子体处理前后表面润湿性的变化,得出较佳的处理参数。结果表明:经N2射流低温等离子体处理后落叶松表面接触角显著下降,表面自由能明显提高,落叶松表面润湿性增强。对于处理截面尺寸为40 mm×40 mm的试件,氮气射流低温等离子体处理落叶松表面的较佳工艺参数为:处理时间20 s,处理高度15 mm。处理后落叶松表面有明显的刻蚀痕迹,表面粗糙度增加,落叶松表面含氧官能团增多,增强了落叶松表面的亲水性,有利于落叶松表面润湿性的提高。

关键词落叶松;氮气射流低温等离子体;表面润湿性

分类号S781.4

Effect of Wettability of Larch Surface Treated by Nitrogen Gas Cold Atmospheric Plasma Jet

Ma Dongchao, Guo Minghui

(Key Laboratory of Bio-Based Material Science & Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, P. R. China)//Journal of Northeast Forestry University,2016,44(4):69-73.

Nitrogen gas cold atmospheric plasma jet (APPJ) was used to treat the surface of larch to improve its wettability. Single factor experiment was designed with processing time and processing height to determine the optimal processing condition. The changes of the wettability of the larch surface were analyzed by measuring the surface contact angle and the calculation of free energy of the larch surface. After the treatment, the contact angle of larch surface was decreased significantly, the free energy and the wettability of larch surface were improved obviously. In terms of a sample with processing section of 40 mm×40 mm, the optimal processing condition of nitrogen gas cold atmospheric plasma jet was with processing time of 20 s and processing height of 15 mm. There were obvious traces of etching on the surface of larch after the treatment, and the roughness of larch surface was increased. Oxygen-related functional groups strengthened the hydrophilia of larch surface, which is conducive to enhancing the wettability of larch surface.

KeywordsLarch; Nitrogen gas cold atmospheric plasma; Surface wettability

落叶松是我国东北、内蒙古林区及华北、西南地区的高山针叶林的主要组成树种,是东北地区主要三大针叶用材树种之一,具有生长速度快、强度高、耐腐性好等特点,是一种理想的木结构用材[1-2]。木材的表面性质关系到木质材料表面的涂饰、胶接、防腐等诸多性能,直接影响木制品的功能改良和装饰特性。……

登录APP查看全文