BIM技术在结构施工中的应用
2016-04-27宋乾双丁奇杰冉维毅SONGQianshuangDINQijieRANWeiyi
宋乾双,丁奇杰,冉维毅SONG Qian-shuang, DIN G Qi-jie, RAN Wei-yi
BIM技术在结构施工中的应用
Application of BIM Technology in Structure Construction
宋乾双,丁奇杰,冉维毅
SONG Qian-shuang, DIN G Qi-jie, RAN Wei-yi
(中国建筑第八工程局上海分公司)(Construction Eighth Engineering Division.Corp.Ltd.Shanghai Branch)
随着建筑信息化的发展以及国家和地方标准相继出台,BIM技术越来越多地应用在了工程的招投标,设计,施工,
运维阶段。而如何基于BIM技术促进现场施工的进度质量管控,成为了施工单位BIM应用的重点工作内容。论文将以上海某大型商办项目的工程实例为蓝本,具体阐述BIM技术在总承包管理模式下结构施工中的应用。
【 Abstract】 With the development of information technology and the introduction of national standards, BIM technology is increasingly applied in the bidding, design, construction, operation and maintenance stage.And how to promote the quality control of the site construction by BIM technology, BIM technology, has become the focus of the construction unit BIM application.This paper will be based on the project of a large commercial project in Shanghai, the project is modeled, and the application of BIM technology in the construction of the general contract management mode is described.
【Keywords】structure construction; BIM modeling; drawings; deepen design; structure mechanical and electrical pipeline collision; 4D simulation; Liang Zhu steel node
1 项目概况
本项目为上海某大型商业综合体,总建筑面积超过20万m2,总占地面积3万m2,包含4栋高层建筑和6栋多层建筑(2~3层)。BIM结构应用目标为全员施工全过程参与,通过建立BIM三维模型,分阶段审核设计的CAD图纸,发现结构碰撞问题以及施工做法的不合理处,做到事前控制,避免施工过程中的返工;通过深化设计,解决机电管线和结构之间的碰撞问题;通过建立梁柱钢筋节点的三维模型进行技术交底,并且以此作为现场施工指导以及验收依据;通过施工过程的4D模拟,促进总承包管理中的进度把控,如图1所示。

图1 结构施工中的BIM应用示意图
2 精度标准
项目精度标准采用美国LOD精度标准,如表1所示。

表1 美国LOD精度标准
3 具体应用点
3.1结构建模阶段应用
精度标准采用LOD300模型,包含尺寸、形状、位置,精确创建洞口位置,在结构施工前完成可作为现场施工参照的模型,及时发现CAD二维图纸可能造成的现场无法施工或其他图纸问题,辅助图纸会审的进行。……
