APP下载

基于有源传输线模型的地-架空屏蔽线缆耦合特性分析与参数计算

2016-04-07峰邱日强牛大鹏刘明川孟西南交通大学电气工程学院成都6003中航一公司成都飞机工业有限公司电磁兼容检测中心成都6009

电工技术学报 2016年4期
关键词:分析模型

朱 峰邱日强牛大鹏刘明川孟 莹(. 西南交通大学电气工程学院 成都 6003. 中航一公司成都飞机工业有限公司电磁兼容检测中心 成都 6009)



基于有源传输线模型的地-架空屏蔽线缆耦合特性分析与参数计算

朱 峰1邱日强1牛大鹏1刘明川2孟 莹2
(1. 西南交通大学电气工程学院 成都 610031
2. 中航一公司成都飞机工业有限公司电磁兼容检测中心 成都 610092)

摘要在外场照射下,计算架空线缆上的感应电流分布时,大地的耦合是不能忽略的,如何从理论上分析大地耦合在线缆上的感应电流,是模拟飞机系统间电子对抗环境的重要基础,因为无论是共模还是异模干扰,都是通过线缆耦合传递能量的。利用有源传输线理论建立的地-线缆耦合模型,给出了纵向阻抗的修正公式,分析了高频下参数的适用范围;同时,针对理论分析结果,进行了实测比对。这为飞机系统间电磁干扰实验的实施提供了必要的理论和数据基础。

关键词:线缆感应电流 有源传输线模型 地-线缆耦合 纵向阻抗

中航科技攻关项目资助(11-063)。

Coupling Characteristic Analysis and Parameter Calculation of Ground and Above-Ground Shielded Cables Based on Transmission Line with a Distributed Source Model

Zhu Feng1Qiu Riqiang1Niu Dapeng1Liu Mingchuan2Meng Ying2
(1. School of Electrical Engineering Southwest Jiaotong University Chengdu 610031 China 2. EMC Center of Chengdu Aircraft Manufacturer Co. Ltd. Aviation Industry Corporation of China Chengdu 610092 China)

Abstract The current distribution on the shield cable irradiated by electromagnetic waves was greatly associated with the ground. How to obtain the induced current on the cable theoretically is an important foundation of simulating the aircraft in the state of electronic countermeasures. Interferences are usually caused by cable coupling energy, no matter what is common mode or different mode interference. By means of transmission line model with a distributed source, this paper provides a correction expression of the transmission line parameters. The corrected parameters can be available to 1GHz within the margins of error ±5dB. Meanwhile, trial comparisons are carried out, which offer a basic foundation for the aircraft confrontation test in the lab.

Keywords:Induced current on the cable, transmission line model with a distributed source, cableground coupling, longitudinal impedance

0 引言

飞机系统间电子对抗,其物理本质是通过近距离发射高强度电磁波的方式,通过飞机孔缝,到达飞机机载设备的屏蔽线缆或线缆束,从而在屏蔽线缆的表面产生感应电流,该感应电流进一步耦合到设备的端口形成电磁干扰。在实验室模拟高频波照射,一般通过电流注入钳把大电流注入线缆,在线缆上产生相同的电流,就认为模拟了空间的电磁照射,该技术称为大电流注入技术(Bulk Current Injection,BCI)[1]。……

登录APP查看全文

猜你喜欢

分析模型
一半模型
隐蔽失效适航要求符合性验证分析
重尾非线性自回归模型自加权M-估计的渐近分布
电力系统不平衡分析
电力系统及其自动化发展趋势分析
3D打印中的模型分割与打包
FLUKA几何模型到CAD几何模型转换方法初步研究
中西医结合治疗抑郁症100例分析
在线教育与MOOC的比较分析
一个相似模型的应用