锅炉受热面管内壁氧化皮检测探讨
2016-03-04王海涛
王海涛



摘要:文章阐述了锅炉高温受热面管中奥氏体不锈钢管和铁素体管(T91、T23、G102、12Cr1MoVG)内壁氧化皮生成脱落的机理,指出磁通量测量原理专用仪器可准确快速检测奥氏体不锈钢管弯头氧化皮堆积状态,高频超声波原理专用测量系统可测量铁素体管内壁氧化膜厚度并实现炉管剩余寿命评估。并结合自身长期跟踪检测的经验,提出实际检测过程中需注意的几个环节,最后从运行和检修管理角度总结防治氧化皮脱落堵塞的几点措施。
关键词:氧化皮;磁通量;高频超声波
中图分类号:TP391 文献标识码:A 文章编号:1009-3044(2015)36-0134-03
Abstract: Author presented the mechanism of building and stripping for oxide skin from austenitic stainless steel pipe and ferrite steel pipe(such as T91、T23、G102、12Cr1MoVG), and pointed out the special tester based on the magnaflux method can test the oxide skin blockade condition at austenitic stainless steel pipe elbow quickly and accurately. the testing system based on the high frequency ultrasonic can measure the internal oxide skin thickness of ferrite steel pipe and forecast the residual life of pipe. The author indicated that the remarkable tache of field testing process and presented some prevention and control measurements of oxide skin stripping off problem from operation and maintain management viewpoint.
Key words: oxide skin; magnaflux; high frequency ultrasonic
随着超(超)临界火电机组的投产运行,由于氧化膜与基体金属的膨胀系数差别较大,高温受热面使用的奥氏体不锈钢管内壁氧化皮会出现脱落,停机后堵塞在管子下弯头,易造成超温甚至爆管,这就是众所周知的超(超)临界锅炉氧化皮堵塞爆管问题。实际上根据国内机组的运行情况,亚临界机组的锅炉还存在铁素体(T91、T23、G102、12Cr1MoVG)管内壁氧化皮脱落堵塞问题。而且随时运行时间的增加,亚临界机组出现堵塞问题的现象有愈演愈烈之势。
1 氧化皮脱落机理及不同管材的临界脱落厚度
在长期运行过程中,高温高压蒸汽的氧化作用,锅炉管内壁会生成氧化皮,这种氧化皮在微观上呈现内外两层结构,其中外层成分主要为Fe3O4(有时最外层还有少量Fe2O3相),内层成分主要为尖晶石结构的(Fe,Cr)3O4。当氧化皮生长到一定厚度值时,即临界脱落厚度(不同的管材的临界脱落厚度不一样),在启停炉过程中受管材收缩热应力等的影响,外层氧化物(即主要成分是Fe3O4的外层)就会在内外层分界面产生开裂而剥落,而其内层的(Fe,Cr)3O4一般不剥落。……
