炉内壁温测点的应用及分析
2016-01-22赵志宏付喜亮史艳强刘文毅
赵志宏, 付喜亮, 刘 吉,史艳强,刘文毅
(1. 内蒙古京隆发电有限责任公司, 内蒙古丰镇012100;2. 华北电力大学 国家火力发电工程技术研究中心,北京102206)
炉内壁温测点的应用及分析
赵志宏1, 付喜亮1, 刘吉1,史艳强1,刘文毅2
(1. 内蒙古京隆发电有限责任公司, 内蒙古丰镇012100;2. 华北电力大学 国家火力发电工程技术研究中心,北京102206)
摘要:京隆发电公司600 MW机组锅炉受热面温度测点取自炉顶大罩壳内,这种方法并不能很好反映炉内管壁实际温度变化趋势与炉内实际温度,尤其是易超温的管壁。针对此种情况,文章对锅炉运行中容易超温的受热面管壁加装了炉内壁温测点,并通过机组启动、正常运行、滑停过程以及停炉通风冷却过程中的炉内外壁温对比分析,证明炉内测点能够很好反映炉内管壁实际温度及其变化趋势,能够为正常运行提供有益的指导。
关键词:炉内壁温;炉外壁温;管壁;受热面;锅炉
中图分类号:TK311
文献标识码:��码:A
DOI:10.3969/j.issn.1672-0792.2015.11.011
收稿日期:2015-09-30。
作者简介:赵志宏(1974-),男,工程师,从事电厂锅炉及运行管理工作,E-mail: zhaozhihong@jinglongpower.com。
Abstract:The temperature sensor of 600 MW boiler heating surface of Jinglong Power Plant was usually installed in the ceiling of the boiler, where the temperature sensor cannot truly feedback the actual temperature changing trend of the furnace wall or the actual temperature of the furnace. Thus, the heating surface is easy to get overheated. In view of the present situation, some temperature sensors are installed on the furnace heating surface, which used to be easily overheated in the normal operation. Through the comparison analysis of the internal and external wall temperatures of the furnace in the process of the unit start-up, normal operation, sliding parameter shutdown and the furnace ventilation cooling, it is found that those temperature sensors inside the boiler can reflect the actual temperature and its changing trend. Accordingly, it can provide useful guidance for the normal operation.
Keywords:the furnace wall temperature;outer furnace wall temperature;tube wall;heating surface;the boiler

0引言
近年来,大中型燃煤电厂中发生事故最多的是锅炉,锅炉事故约占总事故的70 %,其中最多的是“四管爆漏”,约占锅炉事故的60 %~70 %[1],其中过热器与再热器所占比例最大。而且一旦发生超温爆管,不仅要损失大量工质和燃料,影响机组的经济性,还容易引起群体效应,成片受热面受伤,影响机组的安全性,并冲击电网稳定性[2]。因此,对于炉管性能的研究尤为重要,其中管壁金属温度是影响炉管性能的主要因素, 也是开展炉管状态评估和安全性评价工作的关键指标。……
