基于MCGS的自动门监控系统的设计
2016-01-18,
,
(西安航空职业技术学院,陕西 西安 710089)
Design of Automatic Door Monitoring System Based on the MCGS
WANG Yuyu1,LIU Shaojun2
(Xi,an Aeronautical Polytechnic Institute,Xi’an 710089,China)
基于MCGS的自动门监控系统的设计
王瑜瑜1,刘少军2
(西安航空职业技术学院,陕西 西安 710089)
Design of Automatic Door Monitoring System Based on the MCGS
WANG Yuyu1,LIU Shaojun2
(Xi,an Aeronautical Polytechnic Institute,Xi’an 710089,China)
摘要:介绍了将上位机组态软件MCGS,同下位机S7-200的PLC控制系统组合在一起,设计的自动大门监控系统,能够实现自动门信号的检测、打开、计时等待和自动关闭的整个过程。上位机通过工控组态软件MCGS能够实现对系统全程的实时自动监控,并且利用计算机模拟技术,实现了对PLC控制系统的整体模拟和调试。
关键词:MCGS;PLC;自动门;监控
中图分类号:TE937
文献标识码:A
文章编号:1001-2257(2015)03-0063-03
收稿日期:2014-10-22
Abstract:This paper introduces the design of the automatic gate monitoring system combining the host computer configuration software MCGS with the lower computer of S7-200 PLC controlling system. The system can realize the whole process including detection,opening,timing of waiting,automatic closing of the gate. The upper machine can realize real-time monitoring of the system through the configuration software MCGS,and the overall analog and debugging of PLC control system with computer analog technique.
作者简介:王瑜瑜(1983-),女,山东烟台人,硕士研究生,研究方向为计算机控制和自动化理论;刘少军(1982-),男,陕西西安人,实验师,研究方向为电力电子技术。

Key words:MCGS;PLC;automatic gat;monitoring
0引言
随着科技的飞速发展及自动化程度的不断提高,自动门以越来越高的频率不断出现在人们的视野当中,甚至在一些公共场合能达到随处可见的程度。它能够将人或物体靠近门的行为通过感应单元鉴定为开门信号,然后利用控制驱动单元将门打开,待人远离之后自行关闭。由于自动门系统能够实现在无人管理的情况下的全自动控制,它完全颠覆了传统门手动的形象,当之无愧地成为了社会自动化的“标签”。给生活带来简捷,节约资源的同时,它也凭借其自动高挡和智能高效等特点备受市场欢迎。
1系统的总体设计
自动感应门一个周期的动作流程(包括开门与关门)为:红外传感器检测到驶入的信号时,将脉冲信号传送给控制器(PLC),PLC进行数据分析处理后控制电机进行运转,并监控电机转速,达到加速和减速运行的目的。……
