APP下载

剪式齿轮传动机构非线性动力学特性研究

2016-01-15何文运,张俊红,马梁

振动与冲击 2015年15期

剪式齿轮传动机构非线性动力学特性研究

何文运,张俊红,马梁

(天津大学内燃机燃烧学国家重点实验室,天津300072)

摘要:考虑齿侧间隙、时变啮合刚度和摩擦力等因素,建立7自由度剪式齿轮传动系统非线性动力学模型,采用Runge-Kutta法对转速、啮合齿隙、扭簧刚度、预紧力矩等对系统振动特性的影响进行了研究。结果表明,随着转速的升高系统逐渐进入混沌状态,中等转速区间系统的非线性动力学行为对转速的变化更为敏感;随着齿侧间隙的增大,混沌区间增大,混沌特性加强;扭簧刚度影响系统的非线性运动状态,但对冲击现象的影响较小,较小的扭簧刚度更有利于消除冲击现象;扭簧的预紧力矩影响系统啮合状态,最小预紧力矩的大小受负载力矩的影响且近似呈正比例关系。

关键词:剪式齿轮;非线性动力学;扭簧刚度;预紧力矩

中图分类号:TH132.41文献标志码:A

基金项目:南京总参创新工作站(NJCX-RW-20120226)

收稿日期:2014-02-12修改稿收到日期:2014-05-15

基金项目:国防基础科研计划(A2620110003,A2620130003)

收稿日期:2013-10-09修改稿收到日期:2014-07-12

Nonlinear dynamic characteristics of a scissor gear transmission system

HEWen-yun,ZHANGJun-hong,MALiang(State key Laboratory of Engines,Tianjin University,Tianjin 300072, China)

Abstract:Considering backlash of gear pairs, time-varying mesh stiffness and friction, a nonlinear dynamic model of a scissor gear transmission system with 7-DOF was established with the analytical mechanics theory. An example of such a system was used to investigate the effects of rotational speed, backlash, stiffness and preload of torsional spring on the nonlinear dynamic behavior of the system with Runge-Kutta method. The results showed that the system enters a chaotic state with increase in rotating speed, the nonlinear dynamic behavior of the system in the medium rotating speed range is more sensitive to the change of rotating speed; the larger the backlash, the bigger the rotating speed interval of chaos, the stronger the chaotic characteristics; the torsional stiffness of spring has an effect on the non-linear dynamic behavior of the system, but it has a smaller effect on the impact phenomenon, the smaller torsional stiffness is more helpful to avoiding separating and impacting states of the gear pair; preload of torsional spring affects meshing states of the system, the minimum preload torque is almost proportional to the effect of the load torque.

Key words:scissor gear; nonlinear dynamics; torsional stiffness of spring; preload of torsional spring

剪式齿轮可以及时动态弥补齿侧间隙,缓解齿轮啮合时的冲击,既降低了齿啮合的撞击噪声,又对所驱动附件的噪声有较大影响,从而在汽车行业噪声控制上得到广泛应用。国内外学者对剪式消隙齿轮机构的应用、设计、计算等方面进行了大量的研究取得了许多研究成果[1-4],但对剪式齿轮传动系统非线性动力学方面的研究却较少。Kwon等[5]用三段柔性连接曲线表示消隙齿轮刚度模型,建立了消隙齿轮伺服机构动力学模型;……

登录APP查看全文