APP下载

大型柔性整流罩分离特点仿真分析

2016-01-11张大鹏,雷勇军,柳海龙等

振动与冲击 2015年22期

大型柔性整流罩分离特点仿真分析

张大鹏1,雷勇军1,柳海龙2,唐霄汉2

(1. 国防科学技术大学航天科学与工程学院,长沙410073;2. 北京宇航系统工程研究所,北京100076)

摘要:建立整流罩刚体及弹性体有限元模型,联合大型商用软件MSC.Nastran及LS-DYNA对新一代大型运载火箭整流罩分离过程进行仿真分析。通过与刚体模型对比,分析分离过程中整流罩自由模态、变形特点、运动轨迹、能量变化及呼吸运动对分离角速度、罩内可用包络空间的影响。结果表明,整流罩呼吸运动对罩内可用包络空间影响最大区域为后柱段下端,对整流罩质心运动轨迹影响较小,能明显减小过顶角速度及脱钩角速度,使过顶、脱钩时间有所延迟,致分离弹簧势能损失约36%。结论可为整流罩分离系统优化设计、提高整流罩分离可靠性等提供重要参考。

关键词:运载火箭;整流罩;分离;LS-DYNA;有限元分析

中图分类号:V421.3文献标志码:A

Simulations and analyses on separation characteristics of large scale flexible fairing

ZHANGDa-peng1,LEIYong-jun1,LIUHai-long2,TANGXiao-han2(1. College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China; 2. Beijing Institute of Aerospace Systems Engineering, Beijing 100076, China)

Abstract:The rigid and flexible finite element models of a large scale flexible fairing were established. Then the separation of fairing in a new generation launch vehicle was simulated by using combinedly the softwares MSC. Nastran and LS-DYNA.Comparing with the results by the rigid model,the elastic deformation of fairing, its motion trail as well as its energy consumption in the process of separation were analyzed. Besides, the effect of elastic vibration on the separation angular velocity and available envelope space were discussed. The results demonstrate that the available envelope space influenced most significantly by elastic vibration is at the end region of the colum and the elastic vibration has little influence on the displacements of fairing centroid. It also shows that the separation angular velocity will decrease due to elastic vibration when the fairing centroid is passing through the top or the fairing is being unhooked from the launch vehicle and at that time, 36 percent elastic potential energy of the spring is wasted.These conclusions can provide important reference to the structural optimization of fairing separation system and the improvement of reliability of the separation process.

Key words:launch vehicle; fairing; separation; LS-DYNA; finite element analysis

整流罩作为运载火箭有效载荷的保护装置,可使其飞行时防止有效载荷受气动力、气动热及声振等环境因素影响,提供良好环境[1]。运载火箭飞出大气层后整流罩任务完成,需抛掉。为保证整流罩安全分离,须以一定过顶角速度或平抛速度完全脱离箭体,并与箭体保持足够分离距离。为此在整流罩研制中须研究其运动姿态、分离轨迹及罩内包络空间等。而整流罩分离过程仿真分析为研制的重要环节,分析结果可为分离系统及其它相关结构优化设计提供重要依据[2]。

早期整流罩分离仿真研究主要将柔性多体动力学模型退化为多刚体动力学及结构动力学模型进行分析[3]。……

登录APP查看全文