APP下载

超长隧道横向贯通误差分析——洞内平面控制测量部分

2016-01-05李冠青,黄声享

测绘工程 2015年4期

超长隧道横向贯通误差分析——洞内平面控制测量部分

李冠青,黄声享

(武汉大学测绘学院,湖北武汉430079)

摘要:国内超长隧道工程越来越多,而针对20 km以上隧道的横向贯通误差限差问题尚缺乏规范与经验,针对此问题,文中利用CODAPS软件包,具体分析直线型和曲线型超长隧道横向贯通误差的影响因素。通过模拟分析,得出导线网边长、测角精度、测边精度对横向贯通误差的影响规律,为理论研究和工程实践提供借鉴和参考。

关键词:超长隧道;横向贯通误差;测角精度;测边精度;导线边长

中图分类号:TB22文献标志码:A

收稿日期:2014-03-27;修回日期:2014-09-10

作者简介:李冠青(1990-),男,硕士研究生.

Lateralbreakthrougherroranalysisofsuperlongtunnel

——derivedfrominsidehorizontalcontrolsurvey

LIGuan-qing,HUANGSheng-xiang

(SchoolofGeodesyandGeomatics,WuhanUniversity,Wuhan430079,China)

Abstract:There is an increasing number of super long tunnels in China,but technical standards and experiences about lateral breakthrough error range of super long tunnels which are more than 20 km are lacking.Aiming at this problem,it analyzes the lateral breakthrough error influence factors of liner and curved super long tunnel in the use of CODAPS software.And through the simulation analysis,laws of edge length of traverse,angle measuring accuracy and baseline measuring accuracy affecting lateral breakthrough error are obtained,which have a certain reference value for the relevant theoretical research and engineering practice.

Keywords:superlongtunnel;lateralbreakthrougherror;anglemeasuringaccuracy;baselinemeasuringaccuracy;edgelengthoftraverse

现有规范对相向开挖长度超过20km的隧道贯通误差没有明确的规定,而目前国内20km以上的隧道越来越多,且隧道里程不断加大,隧道等级不断提升,铁路隧道、公路隧道、引水隧道都在以这样的趋势发展。本文针对这一现象,着力探讨20km以上隧道的贯通误差问题。隧道贯通误差分地面和洞内两部分,其大小取决于相应控制测量的精度。结合当前的实际工程要求和测量技术水平,横向贯通误差的要求最难达到。对于只有一个贯通面的隧道而言,影响横向贯通误差的因素就是洞内、外平面控制测量的测量误差[1]。本文重点分析洞内平面控制测量引起的横向贯通误差。

1洞内平面控制网

对于超长隧道,洞内导线可分由大地四边形构成的全导线网和交叉双导线网,如图1所示。以20km长、6m宽隧道……

登录APP查看全文