电镀电源控制算法的研究与仿真应用
2015-08-14顾蓉王宝忠刘浪
顾蓉+王宝忠+刘浪



摘 要: 在直流电镀工艺需要电源输出电流调节范围宽、输出电流值稳定的背景下,针对PID参数整定困难,积分分离的增量式PID阈值选定困难,智能算法结构复杂、不易实现这几个问题,首先改进了PID算法,然后将最小二乘法应用在PID参数整定中,最后将改进的PID算法应用在电镀电源的控制中,实现了对系统的精密控制。改进的PID算法结构简单,参数易于整定,阈值易于选取,仿真结果表明,改进的PID算法在电镀电源控制中取得了良好的效果。
关键词: 增量式PID; PID参数整定; 最小二乘法; 电镀电源
中图分类号: TN05?34; TP301.6 文献标识码: A 文章编号: 1004?373X(2015)15?0145?04
Research on electroplating power supply control algorithm and its simulation applications
GU Rong, WANG Baozhong, LIU Lang
(School of Electronics and Information, Jiangsu University of Science and Technology, Zhenjiang 212003, China)
Abstract: DC electroplating technique needs power supply output wide adjustment range current and stable current value. Under this background, the PID algorithm is improved because it is difficult to tune PID parameter, hard to choose integral se?parated incremental PID threshold, and intelligent algorithm has complex structure and is difficult to implement. Then the least square method is applied in PID parameter tuning. Then the improved PID algorithm is applied in electroplating power control, and the precise control to the system is achieved. The improved PID algorithm has the advantages of simple structure, easy to tuning, liable to select the threshold. The simulation results show that the improved PID algorithm has achieved good results in electroplating power supply control.
Keywords: incremental PID; PID parameter tuning; least square method; electroplating power supply
0 引 言
影响电镀质量的因素包括:阳极材料的质量、电镀液的成分、温度、通电时间、搅拌强度、析出的杂质、电流参数等[1],其中电源是电镀最主要的设备。不同的电镀工艺对电源的要求是不一样的,如镀铜,采用脉动直流电能提高镀层光亮度;相反,对于镀铬,就只能用直流电才能得到良好的镀层,如果有交流成份,铬镀层的亮度会降低,甚至发白,发雾,变灰,直流中所含的交流成份越大,这种现象就越严重。除用得很少的铝件交流氧化直接用可调低压交流电外,其他基本上都采用直流电源。任何镀液都有一个获得良好镀层的电流密度范围,获得良好镀层的最大电流密度称为电流密度上限,获得良好镀层的最小电流密度称为电流密度下限,这就要求电源的输出电流从开机开始迅速达到设定值并保持稳定,纹波系数小。……
