初始组构影响砂土直剪力学性状的数值模拟
2015-06-02赵振营
赵振营



摘 要:文中基于PFC2D 非圆颗粒单元的二次开发,通过制备两种不同初始颗粒定向的数值试样,分别为水平定向(H试样)和竖直定向(V试样),研究了初始组构对砂土直剪力学性状的影响。数值试验过程在对比分析两种不同颗粒定向试样直剪宏观力学响应的同时,从颗粒尺度层面探讨了不同颗粒定向试样的初始组构特征,揭示了初始组构影响砂土直剪的细观力学机理。结果表明,颗粒竖直定向的试样其抗剪强度要高于水平定向试样,在细观机理上不同颗粒定向试样的初始平均接触数有关。
关键词:初始组构 直剪试验 颗粒定向 剪切强度
中图分类号:TU41 文献标识码:A 文章编号:1674-098X(2015)03(b)-0071-02
Micromechanical Analysis of the Effect of Initial Fabric on The Direct Shear Tests of Aands by Discrete Element Simulations
Zhao Zhenying,Zhen Lin
(School of Ocean Science and Engineering, Shanghai Maritime University, Shanghai 201306, China)
Abstract:The main objective of this paper is to investigate the effect of initial fabric on the direct shear tests of granular materials by discrete element simulations.Two cases of initial arrangement of particles were considered:(1) the particles created with their major axes parallel to the horizontal direction,namely H samples;and (2) the particles created with their major axes parallel to the vertical direction,namely V samples.The numerical direct shear tests were carried out to explore the direct shear behavior of numerical samples with different initial particle orientations.It was found that the V samples have a higher shear strength than H samples.The micro mechanism of this phenomenon is related to the initial averaged co-ordination number.
Key Words:initial fabric;direct shear test;particle orientation;shear strength
直剪試验是室内研究土体剪切力学性状的重要试验方法,然而,常规的直剪仪只能从宏观上测得土体的抗剪强度指标,不能分析剪切过程试样内部应力应变的变化。数值仿真模拟作为对室内试验的有力补充,目前已被广泛用于包括直剪试验在内的土体力学性质的仿真分析。孔亮、彭仁等[1]基于PFC2D开发了4种非圆形颗粒组,分析了混合试样的不同初始组构对类砂土直剪试验的影响。孔亮、陈凡秀等[2]则研究了不规则颗粒的定向、接触力链和配位数等细观参数在直剪过程中的细观机制。史旦达等[3]针对不同Se的椭圆颗粒试样分别进行直剪试验模拟,分析了不同Se对宏、细观力学特性的影响。总上可知,目前对于直剪试验的仿真模拟大多以纯圆颗粒居多,而对于实际的砂土具有明显的不规则角粒特征,因此针对实际砂土的直剪行为开展椭圆颗粒的仿真模拟,具有重要的应用价值和研究意义。……
