基于双闭环滑模控制器的高频开关电源研究
2014-11-14王俊辉张斌
王俊辉+张斌
摘 要: 针对传统开关电源控制器动态响应特性较慢、对系统条件突变调节效果不理想、控制精度较低的缺点,设计了一种电压+电流的双闭环滑模控制器。该控制器采用电压控制器和电流控制器串联的结构,电压控制器作为外环,电流控制器作为内环,电压控制器的输出作为电流控制器的给定,电流控制器的输出作为最终控制量作用于对象,并应用了滑模控制算法。仿真结果表明,所设计的双闭环滑模变结构控制器与一般单闭环滑模变结构控制器相比,具有更好的控制效果、鲁棒性和动态性能,有效降低了误差。利用FPGA硬件平台实现了所研究的数字控制器,并对高频开关电源样机进行了有效的控制,实验结构验证了所研究控制器的有效性。
关键词: 双闭环控制器; 滑模变结构控制; 高频开关电源; FPGA
中图分类号: TN710?34 文献标识码: A 文章编号: 1004?373X(2014)22?0157?03
Research of high?frequency switching power supply based on double closed?loop sliding mode controller
WANG Jun?hui1, ZHANG Bin1, 2
(1. Xian Institute of Crystal Growing Technology Co., Ltd, Xian 710077, China;
2. School of Automation and Information Engineering, Xian University of Technology, Xian 710048, China)
Abstract: A kind of voltage and current double closed?loop sliding mode controller was designed to overcome the drawbacks of the traditional switching power supply controller, whose dynamic response is slow, regulation effect is not ideal in case of mutation of system conditions and control precision is low. The controller adopts the series structure of voltage controller and current controller. The former is taken as the outer loop, and the latter as the inner loop. The output of the voltage controller is taken as the given of the current controller, and the output of the current controller as the final control action to the object. The sliding mode control algorithm is adopted in it. The simulation results show that double closed?loop sliding mode variable structure controller has better control effect, stronger robustness, better dynamic performance and lower error than general single closed?loop sliding mode variable structure controller. The digital controller was realized with FPGA hardware platform. The high?frequency switching power supply prototype has been effectively controlled. The effectiveness of the controller was validated by experiment.
Keywords: double closed?loop controller; sliding mode variable structure control; high?frequency switching power supply; FPGA
0 引 言
开关电源是通过输出电压反馈和施加有效控制来维持稳定输出电压幅值的装置,广泛应用于工业领域。在高频开关电源的实际控制过程中,传统控制在参数整定过程中对于对象模型过分依赖[1],并且在参数一旦整定计算后,整个控制过程中参数都是固定不变的,所以适应性较差。而在实际系统中,系统状态和参数等会发生变化,体现出不确定性,控制器很难达到最佳的控制效果。滑模控制能够克服被控系统的不确定性, 对干扰和未建模动态具有很强的鲁棒性, 尤其是对开关电源等非线性系统的控制具有良好的控制效果[2?3]。……
