APP下载

蒸汽蓄热技术在渭南工业园区的应用

2014-10-21张岩

基层建设 2014年25期

张岩

摘要:文章主要论述了蒸汽蓄热技术的原理、使用条件及其容积的计算方法,并阐述了该技术在金堆城钼业业集团有限公司公司渭南工业园区投入应用的情况和项目所带来的节能和经济效益,最终应用情况表明蒸汽蓄热器在锅炉出力不足且汽量有较大幅度的频繁波动时具有良好的实用性和经济效益。

关键词:供热能力;汽化潜热;供热负荷

Abstract:This article mainly discusses the characteristics of the steam storage technology,principles,conditions of use and the volume calculation method,In addition it expatiated this technologys status be used in WEINAN industrial park of JDC Molybdenum Industry Group Co.,Ltd,at the same time for the project to bring energy-saving efficiency and cost-effective to do a simple calculation,the final application indicates that the steam accumulator and steam in the boiler output less than the frequency of relatively large volume fluctuations have good practical and economic benefits.

Key words:the ability of distribution、the latent of gasification、the load of distribution

金堆城钼业集团有限公司渭南工业园区(以下简称“园区”)有三台蒸汽锅炉,总吨位为26吨,供应园区及公司居民小区生产、生活用汽。目前,园区生产用汽量峰谷波动较大,经常造成短时间内供汽压力急剧变化影响正常生产,另有新建项目投产,用汽负荷将加大,现有锅炉蒸汽生产能力将不能满足园区用汽需求。按扩建后用汽峰值初步计算,园区还需新增一台10吨蒸汽锅炉。因考虑到新建项目用汽峰值出现的时间较为短暂,约为2-3小时。如果按短期峰值负荷设计锅炉房供应能力,势必造成基建投资浪费,也不利于运行管理。

为了均衡锅炉负荷并满足高峰用汽,必须在锅炉之外的供热系统中储有蒸汽,以耗汽的低谷来补给耗汽的高峰,使用汽负荷的波动不影响锅炉的运行负荷。为此,可在园区新增蒸汽蓄热设备,其基本原理是高压饱和水中蕴含的汽化潜热随着压力变化而储蓄或放出热量。

1、蒸汽蓄热器的工作原理

蒸汽蓄热器是一种典型的储存式压力容器,其进汽管和出汽管各通过一只自动压力调节阀与锅炉供汽主管相连。……

登录APP查看全文