Research on a Passive Force Feedback Damper and Its Model*
2014-09-07DAIJinqiaoYUAlongWANGAiminXUBaoguo
DAI Jinqiao,YU Along,WANG Aimin,XU Baoguo
(1.School of Physical and Electronic and Electrical Engineering,Huaiyin Normal University,Huai’an Jiangsu 223300,China; 2.School of Instrument Science and Engineering,Southeast University.Nanjing 210096,China)
Research on a Passive Force Feedback Damper and Its Model*
DAI Jinqiao1*,YU Along1,WANG Aimin2,XU Baoguo2
(1.School of Physical and Electronic and Electrical Engineering,Huaiyin Normal University,Huai’an Jiangsu 223300,China; 2.School of Instrument Science and Engineering,Southeast University.Nanjing 210096,China)
A magnetorheological fluid based damper has been designed and the model has been set up for force feedback.The design method of the damper is introduced.The sealed shell of the damper is composed of an upside cap and an underside cap.A rotor is located in the shell by an axle,with the magnetorheological fluid being filled in the shell.When the yield stress of magnetorheological fluid applied by a magnetic field changes,the damping force of the rotor rotating relative to shell changes rapidly and continuously.The compositions of the damping force and their controllability are analyzed,and a simplified inverse dynamics model is developed.An experimental system is set up using the damper prototype,on which force feedback experiments of squeezing a compliance object and colliding a rigid body are done.A large scope of force feedback is implemented and so validity of the design and the model of the damper are verified.
damper;force feedback;magnetorheological fluids;simplified inverse dynamics model
对人类获取信息能力的研究表明,视觉信息所占的比例最大,但是当机器人与环境相互作用时,比如组装工件、插销入孔等,仅仅依靠视觉信息,操作者不能从中获得真实的力感受。2002年Marc O Ernst在《Nature》中指出人的视觉偏差直接依赖于力/触觉信息的修正[1]。遥操作和虚拟操作的研究还表明,力/触觉信息的反馈可以极大提高精细作业任务的效率和精度,如对插销入孔操作的对比实验表明,提供操作者力/触觉反馈信息比仅有图像显示可以使任务完成时间缩短近一半[2]。
目前,已经存在的力反馈系统种类很多,如美国Immersion公司生产的CyberGrasp[3]、SenseAble公司生产的PHANToM手臂系列[4]、Force Dimension公司的Delta[5]、Omega手控器[6]以及Rutgers大学的便携式力反馈数据手套Rutgers Master II-ND[7],东南大学设计的基于数据手套的力反馈装置[8]、三维力反馈手控器[9]等,这些系统大多是由伺服电机、压缩空气或电磁场驱动的主动型力再现系统,这些力再现装置虽然能给操作者提供较大范围的力觉反馈,也存在一些问题,(1)一旦出现故障,容易给操作者造成伤害;(2)稳定性差,使力反馈保真性能大打折扣;(3)再现硬度大的物体或刚体时,因所需的力/力矩很大,要求驱动器体积必须足够大以至于不适合用于力反馈系统;(4)因其高的结构刚度,无法反馈柔顺性物体的柔顺性。而被动力反馈系统是能量耗散的,本身具备稳定性特点,也不会对操作者造成伤害,并且比同体积主动力反馈系统反馈的力范围要大得多,所以基于制动器或离合器的被动力反馈系统经常被采用[10]。……
猜你喜欢
杂志排行
传感技术学报的其它文章
- Design a Composite Bio-Signal Monitoring System Based on SOPC*
- A Method of the CMUT Array Design and Imaging Simulation Based on MATLAB*
- Preparation of AChE/IL-GR/CHI/GCE Enzyme Electrode and Its Application for Chlorpyrifos Pesticide*
- Preparation and Application of Sensitive Enzymeless Sensor for Hydrogen Peroxide Based on Prussian Blue/PDDA-Graphene Modified Electrode*
- An Improved Routing Algorithm Based on SPIN for WSN in Straight Narrow Tunnel
- Research on Acoustic Localization Technology for PIG*
