APP下载

阀件在船舶管系设计中的应用分析

2014-04-29张晰见

广东造船 2014年2期

摘要:本文对船舶舱底水吸入原理进行了表述;对管路升降启闭式截止阀、截止止回阀、止回阀结构功能进行了解析,并分析了非吸入止回阀结构障碍原因;阐述了旋启式止回阀负压(真空)工况结构原理及功能定义,并归结了该止回阀功效特性;总结了目前设计上某些误区产生之原因;纠正了对末端吸入止回阀的机械设计惯例。

关键词:负压吸入;止回阀;结构研究

中图分类号:U664.8文献标识码:A

Valve application for shipbuilding piping design

ZHANG Xijan

( Shandong Weihai shipyard,Weihai 264200 )

Abstract: In this paper, the principle of ship's bilge suction expression; For piping lifting crane type globe valve, globe check valve, check valve structure function parsing, and analyzed the reason of the suction check valve structure obstacle; Expounds the swing check valve working condition of negative pressure (vacuum) structure principle and function definitions, and the check valve five efficacy features; Summarizes to the cause of the current design error; Corrected to end suction check valve mechanical design practice; To arouse the industry authority departments, experts and relevant personage attention and correction.

Key words: Negative pressure suction; valve;structureresearch

1前言

笔者在国营船厂从事修造船管理工作多年,在多次交船试验中经历抽舱底水都要用海水引水的实例,此程序在业内已成惯例。但此方法在设计规范中是不允许的,规范规定:“舱底泵与舱底水总管之间的连接管…应装设截止止回阀”,因此泵前的截止阀都设计为截止止回阀。 同时规范还规定:“所有的动力舱底泵,均应为自吸式泵或带自吸装置的泵”。由此而来,一方面设计规范中不允许海水进入舱底水管系,而另一方面实践中却屡屡行不通。

2011年,某57 000 DWT货船舱底水管系设计将泵前止回阀设计为的截止止回阀GB/T591-93,并且将末端止回阀型号改为GB/T592-93 B(此阀原正常设计为垂直吸入止回阀CB/T3478-92,阀体直达污水井底部不接管)。笔者经过对标准中能用于舱底水管系所有的截止止回阀、止回阀结构功能进行比对后终于有了结论:是设计的止回阀型号及该类阀结构功能出现了原理性悖逆,才致使该类型止回阀无法打开,因此提出将末端止回阀型号改为旋启式止回阀;……

登录APP查看全文