目录
- Ground threat prediction-based path planning of unmanned autonomous helicopter using hybrid enhanced artificial bee colony algorithm
- Layered metastructure containing freely-designed local resonators for wave attenuation
- Predicting impact strength of perforated targets using artificial neural networks trained on FEM-generated datasets
- Construct a 3D microsphere of HMX/B/Al/PTFE to obtain the high energy and combustion reactivity
- Ignition processes and characteristics of charring conductive polymers with a cavity geometry in precombustion chamber for applications in micro/nano satellite hybrid rocket motors
- Recent research in mechanical properties of geopolymer-based ultrahigh-performance concrete: A review
- Effects of projectile parameters on the momentum transfer and projectile melting during hypervelocity impact
- Elliptical encirclement control capable of reinforcing performances for UAVs around a dynamic target
- New insights in nano-copper chromite catalyzing ultrafine AP:Evaluation of dispersity and mixing uniformity
- Unraveling the role of dual Ti/Mg metals on the ignition and combustion behavior of HTPB-boron-based fuel
- Effect of neutral polymeric bonding agent on tensile mechanical properties and damage evolution of NEPE propellant
- Plastic deformation behavior of a Cu-10Ta alloy under strong impact loading
- An effective catalyst carrier SiO2:Enhancing catalytic and combustion properties of CuFe2O4 on energetic components
- Cognitive interference decision method for air defense missile fuze based on reinforcement learning
- Toughening ultrastrong low-density steel by textured δ-ferrite lamellas
- Trajectory tracking guidance of interceptor via prescribed performance integral sliding mode with neural network disturbance observer
- Microscopic defects formation and dynamic mechanical response analysis of Q345 steel plate subjected to explosive load
- An improved particle filter indoor fusion positioning approach based on Wi-Fi/ PDR/ geomagnetic field
- Numerical study on the cavity dynamics for vertical water entries of twin spheres
- Investigations of the mechanical response of dummy HTPB propellant grain under ultrahigh acceleration overload conditions using onboard flight-test measurements
- Analysis on the turning point of dynamic in-plane compressive strength for a plain weave composite
- Coupling effect on the thermal hazard assessment of hazardous chemical materials via calorimetric technologies and simulation approaches
- Shock Initiation Experiments with Modeling on a DNAN Based Melt-Cast Insensitive Explosive
- An intelligent control method based on artificial neural network for numerical flight simulation of the basic finner projectile with pitching maneuver
- Mussel-inspired PTW@PDA composites for developing high-energy gun propellants with reduced erosion and enhanced mechanical strength
- Nonlinear robust adaptive control for bidirectional stabilization system of all-electric tank with unknown actuator backlash compensation and disturbance estimation
- A progressive framework for rotary motion deblurring
- Ballistic design and testing of a composite armour reinforced by CNTs suitable for armoured vehicles
- Research on simulation of gun muzzle flow field empowered by artificial intelligence
- High-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted howitzer based on probability density evolution method
- Preliminary discussion on the ignition mechanism of exploding foil initiators igniting boron potassium nitrate
- A new method for evaluating the firing precision of multiple launch rocket system based on Bayesian theory
- Formation behaviors of rod-like reactive shaped charge penetrator and their effects on damage capability
- An internal ballistic model of electromagnetic railgun based on PFN coupled with multi-physical field and experimental validation
- Solvent transport dynamics and its effect on evolution of mechanical properties of nitrocellulose (NC)-based propellants under hot-air drying process
- Improving the spaceborne GNSS-R altimetric precision based on the novel multilayer feedforward neural network weighted joint prediction model
- Improving path planning efficiency for underwater gravity-aided navigation based on a new depth sorting fast search algorithm
- Effects of content and particle size of TiH2 powders on the energy output rules of RDX composite explosives
- Simplified quantitative analysis method and its application in the insitu synthesized copper-based azide chips
- Macro Meso Response and Stress Wave Propagation Characteristics of MCT High-Voltage Switch Under Shock load
- Investigation of high rate mechanical flow followed by ignition for high-energy propellant under dynamic extrusion loading
- Study on theoretical model for electrical explosion resistivity of Al/Ni reactive multilayer foil
- Experimental investigation of engineered geopolymer composite for structural strengthening against blast loads
- Protective performance of shear stiffening gel-modified foam against ballistic impact: Experimental and numerical study
- Theoretical analysis of the elastic Kelvin-Helmholtz instability in explosive weldings
- Optimization of jamming formation of USV offboard active decoy clusters based on an improved PSO algorithm
- Optimal search path planning of UUV in battlefeld ambush scene
- High-speed penetration of ogive-nose projectiles into thick concrete targets: Tests and a projectile nose evolution model
- Full-domain collaborative deployment method of multiple interference sources and evaluation of its deployment effect
- Research on the quasi-isentropic driving model of aluminized explosives in the detonation wave propagation direction
- TransTM: A device-free method based on time-streaming multiscale transformer for human activity recognition
- Process and performance of DAAF microspheres prepared by continuous integration from synthesis to spherical coating based on microfluidic system