目录
- Vapor-phase decomposition of dimethyl methylphosphonate(DMMP),a sarin surrogate,in presence of metal oxides
- Numerical studies on four-engine rocket exhaust plume impinging on flame de flectors with afterburning
- A novel method for determination of lethal radius for high-explosive artillery projectiles
- Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization
- Visual-attention gabor filter based online multi-armored target tracking
- Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2(M=Mg,Ti,Zr)of energetic materials
- Damage to aircraft composite structures caused by directed energy system:A literature review
- Thermal and combustion behavior of Al-MnO2 nanothermite with poly(vinylidene fluoride-co-hexa fluoropropylene)energetic binder
- Supercritical carbon dioxide as a new working medium for pneumatic launch:A theoretical study
- Fabrication and characterization of Al-CuO nanocomposites prepared by sol-gel method
- The mechanism of liquid dispersing from a cylinder driven by central dynamic shock loading
- Partial penetration of annular grooved projectiles impacting ductile metal targets
- Response of masonry systems against blast loading
- Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings
- A cooperative interference resource allocation method based on improved fire fly algorithm
- Trajectory predictions of new lift separation sabots
- Design and analysis of a scheme for the naval gun test shell entering the bore
- Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density
- In fluence of magnetically constricted arc traverse speed(MCATS)on tensile properties and microstructural characteristics of welded Inconel 718 alloy sheets
- Adaptive subspace detection based on two-step dimension reduction in the underwater waveguide
- Adaptive control of track tension estimation using radial basis function neural network
- Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers
- Dynamic necking of a nearαtitanium alloy at high strain rates:Experiments and modelling
- Numerical and experimental study on the response characteristics of warhead in the fast cook-off process
- Research on fuze microswitch based on corona discharge effect
- Numerical study on the case effect of a bomb air explosion
- Recent progress on transition metal oxides and carbon-supported transition metal oxides as catalysts for thermal decomposition of ammonium perchlorate
- Effect of change of sand properties on travel distance of ricocheted debris
- Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact
- Experimental and numerical investigation on penetration of clay masonry by small high-speed projectile
- Bidirectional parallel multi-branch convolution feature pyramid network for target detection in aerial images of swarm UAVs
- Multi-scale traf fic vehicle detection based on faster R-CNN with NAS optimization and feature enrichment
- In fluences of different crossing types on dynamic response of underground cavern subjected to ground shock
- Fuzzy recognition of missile borne multi-line array infrared detection based on size calculating
- A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems
- The deformation and failure mechanism of cylindrical shell and square plate with pre-formed holes under blast loading
- Impact of atmospheric turbulence on coherent beam combining for laser weapon systems
- Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions
- Numerical research on adverse effect of muzzle flow formed by muzzle brake considering secondary combustion
- Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity