目录
- A comprehensive review of the effect of different kinetic promoters on methane hydrate formation
- An experimental study on the choked flow characteristics of CO2 pipelines in various phases
- Hydrothermal and entropy generation specifications of a hybrid ferronanofluid in microchannel heat sink embedded in CPUs
- Experimental and Numerical Study of Gas-Liquid Flow in a Sectionalized External-Loop Airlift Reactor
- Numerical simulation of heavy fuel oil atomization using a pulsed pressure-swirl injector
- Experimental research on steady-state operation characteristics of gas–solid flow in a 15.5 m dual circulating fluidized bed system
- Thermal performance assessment of self-rotating twisted tapes and Al2O3 nanoparticle in a circular pipe
- Time-series analysis of the characteristic pressure fluctuations in a conical fluidized bed with negative pressure
- Adopting inclined channel to decline the salinity mixing for rotary energy recovery device:Simulation and optimization
- A numerical study of accelerated moderate or intense low-oxygen dilution (MILD) combustion stability for methane in a lab-scale furnace by off-stoichiometric combustion technology
- A level set based immersed boundary method for simulation of non-isothermal viscoelastic melt filling process
- Experimental study on sand particles accumulation,migration and separation efficiency in slug catcher
- Simultaneously spray-assisted assembling reversible superwetting coatings for oil–water separation
- Static and dynamic studies of adsorption by four macroporous resins to enrich oridonin from Rabdosia rubescens
- Catalytic ozonation of volatile organic compounds (ethyl acetate)at normal temperature
- One-step synthesis of Ni@Pd/NH2-Fe3O4 nanoparticles as affordable catalyst for formic acid dehydrogenation
- Controllable synthesis of polyoxymethylene dimethyl ethers by ionic liquids encapsulated in mesoporous SBA-16
- Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries
- Electrochemical oxidation of Rhodamine B with cerium and sodium dodecyl benzene sulfonate co-modified Ti/PbO2 electrodes:Preparation,characterization,optimization,application
- Dehydrogenation of isobutane to isobutene over a Pt-Cu bimetallic catalyst in the presence of LaAlO3 perovskite
- 2-Hydroxy-1,4-napthoquinone solubilization,thermodynamics and adsorption kinetics with surfactant
- Effect of preparation methods on the hydrocracking performance of NiMo/Al2O3 catalysts
- Selective catalytic reduction failure of low NH3-NOx ratio
- Numerical investigation of granular mixing in an intensive mixer:Effect of process and structural parameters on mixing performance and power consumption
- Pore plugging effects on the performance of ZSM-5 catalyst in MTP reaction using a discrete model
- Vacuum pressure swing adsorption process for coalbed methane enrichment
- High surface area and mesoporous activated carbon from KOH-activated dragon fruit peels for methylene blue dye adsorption:Optimization and mechanism study
- Experimental results for the vapor–liquid equilibria of(formaldehyde+1,3,5-trioxane+methanol+salt+water) systems and comparison with predictions
- Tailoring polymeric composite gel beads-encapsulated microorganism for efficient degradation of phenolic compounds
- Hydrogenolysis of organosolv hydrolyzed lignin over high-dispersion Ni/Al-SBA-15 catalysts for phenolic monomers
- An efficient route towards R-2-phenoxypropionic acid synthesis for biotransformative production of R-2-(4-hydroxyphenoxy)propionic acid
- Investigation of the methane hydrate surface area during depressurization-induced dissociation in hydrate-bearing porous media
- Effect of operating parameters on the performance of thermally regenerative ammonia-based battery for low-temperature waste heat recovery
- Synthesis and characterization of a series of cross-linked polyamines for removal of Erichrome Black T from aqueous solution
- Investigation on the fabrication of lightweight aggregate with acid-leaching tailings of vanadium-bearing stone coal minerals and red mud
- Performance evaluation of the incorporation of different wire meshes in between perforated current collectors and membrane electrode assembly on the Passive Direct methanol fuel cell
- Modified corn-core powder for enhancing sludge dewaterability:Synthesis,characterization and sludge dewatering performance
- Synthesis of cation exchange resin-supported iron and magnesium oxides/hydroxides composite for nitrate removal in water
- Fabrication of a highly efficient new nanocomposite polymer gel for controlling the excess water production in petroleum reservoirs and increasing the performance of enhanced oil recovery processes
- An advanced ash fusion study on the melting behaviour of coal,oil shale and blends under gasification conditions using picture analysis and graphing method
- Evaluation of oxygen uncoupling characteristics of oxygen carrier using micro-fluidized bed thermogravimetric analysis
- Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage
- Comparative study of different hydro-dynamic flow in microbial fuel cell stacks
- Modeling viscosity of methane,nitrogen,and hydrocarbon gas mixtures at ultra-high pressures and temperatures using group method of data handling and gene expression programming techniques
- Synthesis and characterization of high strength polyimide/silicon nitride nanocomposites with enhanced thermal and hydrophobic properties
- Synthesis of zinc oxide nanoparticles reinforced clay and their applications for removal of Pb (II) ions from aqueous media
- Preparation and antibacterial properties of polycaprolactone/quaternized chitosan blends
- Synthesis and optimization of high surface area mesoporous date palm fiber-based nanostructured powder activated carbon for aluminum removal
- Structure-dependent re-dispersibility of graphene oxide powders prepared by fast spray drying